From: Edouard Zorrilla (ezorrilla@tsf.com.pe)
Date: Sun Nov 09 2008 - 10:29:06 ARST
Just to add, my company have bought two ace's along two chassis 6506 to
perform a load balancing and I need to set them up, the issue is that I have
never set up this before.
Regards
----- Original Message -----
From: "Edouard Zorrilla" <ezorrilla@tsf.com.pe>
To: "amernas" <taloust@gmail.com>; <ccielab@groupstudy.com>
Cc: <security@groupstudy.com>
Sent: Sunday, November 09, 2008 7:17 AM
Subject: Re: ACE Sample Configs
>I am a kind of confusing regarding this, for instance the command : " peer
>ip address X.X.X.14 255.255.255.0"
>
> It means I do not need to enter any command on the peer context which is
> working as a standby ? If so what do I need to enter on the peer context
> ?. Would you please unicast me with the config on both contexts ?
>
> Thanks a lot for your patience,
>
> Regards
>
> ----- Original Message -----
> From: "amernas" <taloust@gmail.com>
> To: "'Edouard Zorrilla'" <ezorrilla@tsf.com.pe>; <ccielab@groupstudy.com>
> Cc: <security@groupstudy.com>
> Sent: Sunday, November 09, 2008 7:02 AM
> Subject: RE: ACE Sample Configs
>
>
> Here is an example of the configuration of the primay ACE with 2 contexts
> RED-1 and BLUE-1
>
> ###################################
> .
> .
> hostname ACE-PRIMARY
> .
> .
> resource-class RED
> limit-resource all minimum 45.00 maximum equal-to-min
> resource-class BLUE
> limit-resource all minimum 45.00 maximum equal-to-min
> ..
> ..
> interface vlan 2
> description MANAGEMENT INTERFACE
> ip address X.X.X.13 255.255.255.0
> peer ip address X.X.X.14 255.255.255.0
> service-policy input ACE-MGMT-TRAFFIC
> no shutdown
>
> ft interface vlan 52
> description FAILOVER AND SYNC INTERFACE
> ip address X.X.X.1 255.255.255.0
> peer ip address X.X.X.2 255.255.255.0
> no shutdown
> .
> .
> context RED-1
> description RED-1 CONTEXT
> allocate-interface vlan 9
> allocate-interface vlan 30-31
> allocate-interface vlan 55
> member RED
>
> context BLUE-1
> description BLUE-1 CONTEXT
> allocate-interface vlan 7
> allocate-interface vlan 40-41
> allocate-interface vlan 50
> member BLUE
> .
> .
> ft peer 1
> heartbeat interval 1000
> heartbeat count 10
> ft-interface vlan 52
>
> ft group 1
> peer 1
> peer priority 90
> associate-context ADMIN-CONTEXT
> inservice
>
> ft group 2
> peer 1
> peer priority 90
> associate-context RED-1
> inservice
>
> ft group 3
> peer 1
> peer priority 90
> associate-context BLUE-1
> inservice
>
> ############################################
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> Edouard Zorrilla
> Sent: Saturday, November 08, 2008 11:54 PM
> To: ccielab@groupstudy.com
> Cc: security@groupstudy.com
> Subject: ACE Sample Configs
>
>
> Anyone who has more real examples how to set up a ACE (Application Control
> Engine) module ? I found this :
>
> http://www.cisco.com/en/US/products/ps6906/tsd_products_support_model_home.h
> t
> ml
>
> But I gues this is not enough since the examples do not show how to set up
> the standby module,
>
> Regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:30 ARST