From: Paul Adams (ccie.paul@gmail.com)
Date: Mon Nov 03 2008 - 17:37:14 ARST
Yup !!!
Thats a experience champion reply.
Many Thanks
On Mon, Nov 3, 2008 at 10:32 PM, Marko Milivojevic <markom@markom.info>wrote:
> On Mon, Nov 3, 2008 at 19:12, Paul Adams <ccie.paul@gmail.com> wrote:
> > Hello,
> >
> > Stupid Question ; if someone has an answer ; apart from getting error
> > messages to know it???
> >
> > BB1 is directly to R1
> >
> >
> > Is there a way to know if BB1 is configured with Speed 100 and duplex
> full
> > or other settings assuming BB1 is transparent to you.
>
> Yes and no :-).
>
> Step 1: If BB1 is running CDP, enable it on you end and it will tell
> you if there is a mismatch.
> Step 2: Configure your end as auto and bounce the interface. If it
> negotiates half duplex, then the other end is most likely fixed. If it
> doesn't proceed to step 3.
> Step 3: Ping BB1 with 10000 1500B packets. Look at interface counters.
> If there are no errors, you are good. If you see late or deferred
> collisions or CRC errors, you probably got it wrong.
>
> --
> Marko
> CCIE #18427 (SP)
> My network blog: http://cisco.markom.info/
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST