From: Darby Weaver (ccie.weaver@gmail.com)
Date: Sun Nov 02 2008 - 11:20:01 ARST
You should still be able to set the clock (time/date/dst) and then configure
NTP to an outside source for clocking.
clock set 08:17:00 nov 2 2008
ntp server 1.1.1.1 source inside
or
ntp server 2.2.2.2 source outside
etc.
Are you saying that you cannot?
Set the clock to your timezone and as accurate a time as you can first.
Then configure the NTP options. Let the NTP Server worry about setting the
timezone and the clients will inherit it from them - think of your cell
phone for an immediate example.
Here are some of your options:
http://www.cisco.com/en/US/docs/security/pix/pix63/command/reference/mr.html
Now I hope you are not asking for the PIX 515 to be the NTP Server, right?
On Sun, Nov 2, 2008 at 7:18 AM, Gary Duncanson <garyduncanson@btinternet.com
> wrote:
> Amin,
>
> Not sure what you are talking about specifically there. Are you referring
> to logging? Are you using NTP?
>
> Gary
> ----- Original Message ----- From: "ccie" <ccie@just-horizon.com>
> To: <ccielab@groupstudy.com>
> Sent: Sunday, November 02, 2008 10:09 AM
> Subject: I have a PIX 515 that loss its clock upon report. And the clock is
> so imperative for me.
>
>
>
> Hi Expert,
>>
>> I have a PIX 515 that loss its clock upon report. And the clock is so
>> imperative for me.
>>
>> Is there any advices?
>>
>> Regards,
>>
>> Amin
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Dec 01 2008 - 08:18:28 ARST