Cisco document: redistribution with distribute-list

From: Jack (ccie.unnumbered@gmail.com)
Date: Thu Oct 30 2008 - 10:16:40 ARST

• Next message: Huan Pham: "NTP - Why NTP not synchronized, yet the router gets correct"
• Previous message: Victor Cappuccio: "Re: IPv6 - The most appropriate interface ID"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Cisco Document

http://www.cisco.com/en/US/docs/ios/iproute/configuration/guide/irp_ip_prot_indep_ps6350_TSD_Products_Configuration_Guide_Chapter.html#wp1057215

has the following examples:

      EIGRP Redistribution: Examples

In the following configuration, network 10.0.0.0 is configured under
EIGRP autonomous system 1 and network 192.168.7.0 is configured under
EIGRP autonomous system 101:
Router(config)# router eigrp 1
Router(config-router)# network 10.0.0.0
Router(config)# router eigrp 101
Router(config-router)# network 192.168.7.0*

*In the following example, routes from the 192.168.7.0 network are
redistributed into autonomous system 1:
Router(config)# access-list 3 permit 192.168.7.0
Router(config)# router eigrp 1
Router(config-router)# redistribute eigrp 101
Router(config-router)# distribute-list 3 out eigrp 101

Please explain what the last line means. Why eigrp 1 wants to
distribute 192.168.7.0 back to eigrp 101?

Thanks,
Jack

Blogs and organic groups at http://www.ccie.net

• Next message: Huan Pham: "NTP - Why NTP not synchronized, yet the router gets correct"
• Previous message: Victor Cappuccio: "Re: IPv6 - The most appropriate interface ID"
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:23 ARST