From: Paul Adams (ccie.paul@gmail.com)
Date: Mon Oct 27 2008 - 09:26:30 ARST
Frame-relay config is there ; I just removed while posting it.R1 Serial IP
1.1.13.1
R3 Serial IP 1.1.13.3
From R1 i can ping 1.1.13.3
From R3 I can ping 1.1.13.1
Its a very very silly mistake I know ;
On Mon, Oct 27, 2008 at 2:20 PM, Bogdan Sass <bogdan.sass@catc.ro> wrote:
> Paul Adams wrote:
>
>> Hello
>>
>> Cake was good but strawberry gives me hard-time
>>
>>
>>
> I do not see the DLCIs under your frame-relay map commands. Did you check
> those?
>
> Also, I do not understand what you mean by "FR IPs are pingable, but R1
> cannot ping R3". Are you trying to ping a RIP-learned address? (in that
> case, you will also need FR mappings for the link-local addresses - have a
> look at `show ipv6 route`, and you will see the LL address listed as the
> next hop for the RIP routes).
>
> R1 IPV6 address cannot ping R3 & vice-versa
>>
>> Both the ports are up ;
>> Frame-relay IP are pingable as well.
>>
>>
>> R1 S0/1 - IPV6 address 2008:1:1:1:11::1/64
>> R3 S0/0 - IPV6 address 2008:1:1:1:33::3/64
>>
>> R1
>> ipv6 unicast Routing
>>
>> ipv6 router rip 1
>>
>>
>> interface serial 0/0
>> ipv6 address 2008:1:1:1:11::1/64
>> ipv6 enable
>> ipv6 rip enable
>> frame-relay map ipv6 2008:1:1:1:33::3
>>
>>
>> R3
>> ipv6 unicast Routing
>>
>> ipv6 router rip 1
>>
>>
>> interface serial 0/0
>> ipv6 address 2008:1:1:1:33::3/64
>> ipv6 enable
>> ipv6 rip enable
>> frame-relay map ipv6 2008:1:1:1:11::1
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> Bogdan Sass
> CCAI,CCSP,JNCIA-ER,CCIE #22221 (RS)
> Information Systems Security Professional
> "Curiosity was framed - ignorance killed the cat"
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:22 ARST