From: Marko Milivojevic (markom@markom.info)
Date: Sun Oct 26 2008 - 14:43:23 ARST
On Sun, Oct 26, 2008 at 16:16, <ccieking@gmail.com> wrote:
> Thanks Mr.Marko
> I'm sorry to forgot to add this lines in my previous post
> Rack1R2(config-vpdn-acc-in)#protocol ?
> any Use any protocol
> l2f Use L2F
> l2tp Use L2TP
> pptp Use PPTP
> Rack1R2(config-vpdn-acc-in)#protocol
> I tried in
> c3640-jk9o3s-mz.124-16.bin
> c7200-k91p-mz.122-25.S9.bin
> c3725-advipservicesk9-mz.124-21.bin
> c7200-adventerprisek9-mz.124-15.T5.bin
You will have no luck with 7200 and that 12.2S IOS - it doesn't
support PPPoE server. 12.4 support "new" method, where PPPoE is not
configured under VPDN group configuration. Check the following link
(watch for wrap):
I forgot what version was cut between "old" and "new" format, but I
would highly recommend that you become familiar with both. If I
remember well, some rather old IOS versions are listed on CCIE site as
being part of the test.
-- Marko CCIE #18427 (SP) My network blog: http://cisco.markom.info/Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:22 ARST