From: Shahid Ansari (shahid1357@gmail.com)
Date: Fri Oct 24 2008 - 14:50:00 ARST
For Eigrp to estabish neighbour relationship , K value must be match on both
sides.By default only Bandwidth and delay are under consideration .
Did you change K value by "metric weight" command
Can you check on both routers "Sho Ip protcocol".
Solution is to keep same K Value on both side .
On Fri, Oct 24, 2008 at 7:31 PM, nouman abbasi <abbasi.nouman@gmail.com>wrote:
> Hi,
>
> What this Error is referring to?
> 05:39:03: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 100: Neighbor
> 150.3.2.254(FastEthernet0/10) is down: K-value mismatch
>
>
>
>
> <<Another Concern >>
> Why I get this message when the neigbor is UP
>
> *Feb 19 09:31:56.955: %DUAL-5-NBRCHANGE: IP-EIGRP(0) 2: Neighbor
> 2.2.17.2(FastEthernet0/1) is down: Interface Goodbye received
>
> R5#sh ip eigrp neighbors
> IP-EIGRP neighbors for process 2
> H Address Interface Hold Uptime SRTT RTO Q
> Seq
> (sec) (ms) Cnt Num
> 0 2.2.17.2 Fa0/1 12 00:06:25 1 200 0
> 11
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Regards,Shahid Ansari Saudi Arabia(Riyadh)
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:22 ARST