From: syedraheel@gmail.com
Date: Mon Oct 20 2008 - 16:05:20 ARST
Hi!
While doing some labing I came accross an interesting scenario,,,,
R1 and BB1 are connected to the same switch SW1 in same vlan 10. But the IPs of
their interfaces which connect to the switch are of different subnets like
101.1.1.1 and 102.1.1.1
its like R1(e0)-----(e1/1)SW1(e1/2)-----(e0)R2 , where e1/1 and e1/2 are
configured in the same access vlan10
Now, I cant ping between the two router interfaces, I set a static route
102.1.1.1 255.255.255.255 e0 on R1 and similarly a route back on R2.......I
still see encapsulation failed on the debug.
So whats happening is that when its arping for the destination address its not
getting a reply back with a mac-address rite?...
Can anyone explain this behaviour? How can I enable communication between the
two routers?
May be its too simple for a ccie forum ....but still we tend to forget the
basics while studying for advance topics sometimes
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST