From: Hobbs (deadheadblues@gmail.com)
Date: Sun Oct 19 2008 - 23:09:32 ARST
hello,
I don't know what the freak I'm doing wrong. I can't get a file to copy via
http, it says "permission denied" on the server but I do not have any
access-class or authentication enabled. R7 = client. R8 = server:
R7---R8
R8:
R8#dir flash:test.html
Directory of flash:/test.html
11 -rw- 2083 Oct 20 2008 00:31:54 +00:00 test.html
64016384 bytes total (19439616 bytes free)
R8#show run | inc http
ip http server
no ip http secure-server
ip http path flash:
R8#
R7:
R7#copy http: flash:
Address or name of remote host [200.0.0.8]?
Source filename [test.html]?
Destination filename [test.html]?
%Error opening http://200.0.0.8/test.html (Permission denied)
R7#
I don't have http authentication enabled on R8. I believe its disabled by
default, but I even did "no ip http auth" just in case. I dont have any
ACL's on R7 to R8 interfaces.
any ideas? thanks
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST