From: Reza Toghraee (reza@toghraee.com)
Date: Sun Oct 19 2008 - 05:24:51 ARST
Omkar,
I think this task is teaching you how to use virtual-links. And you learned.
There is no Typeo.
Is you replace area 1 with 0 , it will be basic ospf ccna question.
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Omkar Tambalkar
Sent: Sunday, October 19, 2008 3:27 AM
To: ccielab@groupstudy.com
Subject: Soup to Nuts OSPF Lab 2: Authentication question
I am confused in OSPF lab 2 for Authentication.
The way initial configuraton gets done, the ABR of area 2 is not connected
to area 0 directly but is connected to area 1. Area 1 has another ABR that
is connected to Area 0. Obviously other routers in area 2 cannot receive
routes from areas except area 2 and vice versa unless virtual link is
created by using area 1 as transit area.
The task is to to ensure that all routers in the OSPF domain have
reachability to the advertised networks in OSPF. Without specifics, should I
just configure the virtual link to obtain reachability or there is a typo in
describing initial configuration such that area 0 should really replace area
1 in the topology so that it is in the backbone?
R1--------area 2------------R2
|
|
area 1
|
|
R4--------area 0------------R3
- Later,
Omkar
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST