From: Scott Morris (swm@emanon.com)
Date: Sat Oct 18 2008 - 16:05:49 ART
PRI yes BRI no. You need a simulator for the switch language.
As Scott(1) noted, Adtran makes a simulator that isn't necessarily cheap. I
think Teltone makes one and there's another that's escaping my mind at the
moment that used to be popular back when ISDN was in the R&S lab! :)
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Radioactive Frog
Sent: Saturday, October 18, 2008 8:37 AM
To: Reza Toghraee
Cc: Cisco certification
Subject: Re: OT: is it possible to have BRI back2back connection?
yes u can do that, real easy one :)
r1---isdn pri------------r2
just use a isdn crossover cable. remember its not E1 crsoss over, neither
ethernet crossover.
router1 =>isdn protocol-emulate network
router2 =>isdn protocol-emulate user
confirm it using show isdn status.
thats all.
-frog
On Sat, Oct 18, 2008 at 8:40 PM, Reza Toghraee <reza@toghraee.com> wrote:
> Hi
>
>
>
> Is there any way to connect 2 cisco 25xx routers with their BRI
> interface without any isdn switch?
>
>
>
> Thanks
>
> Reza
>
>
> Blogs and organic groups at http://www.ccie.net
>
> ______________________________________________________________________
> _ Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST