From: Radioactive Frog (pbhatkoti@gmail.com)
Date: Sat Oct 18 2008 - 09:40:51 ART
and i have created a summary on R2 using a /22 network to send to area 11.
where area 11 comes in there ?
-frog
On Sat, Oct 18, 2008 at 10:43 PM, stephen skinner <stephenski@gmail.com>wrote:
> hello,
>
> could anyone shed some light on this please.
>
> i have the following topology
>
> R1 R3
> - -
> - -
> --
> R2 -----------R4
>
>
> hub and spoke topology for R1 , R2, R3 all using physicall interfaces.
>
> Ethernet topology fot R2-R4
>
> R1,R2,R3 area in area 10 ( OSPF point-to-Multipoint interfaces)
> R2 and R4 are in area 0 ( OSPF Broadcast interfaces)
>
> R4 area 0 is sending the following networks
>
> 10.10.10.0/24
> 10.10.11.0/24
> 10.10.12.0/24
>
> and i have created a summary on R2 using a /22 network to send to area 11.
>
> is there any way to send this summary to just R3 instead of R1 ???
>
> i know i can filter it out on R1, but i wanted to try and stop it leaving
> R2
> bound for R1
>
> i have been trying differnet things, Area filter , outbound distribute list
> ,
>
> but nothing seems to work ,
>
> does anyone have any idea.
>
> TIA
>
>
> --
> Only two things are infinite, the universe and human stupidity, and I'm not
> sure about the former.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST