From: Bob Sinclair (bob@bobsinclair.net)
Date: Tue Oct 14 2008 - 18:19:55 ART
Naman,
Looks good to me! To put it another way: if a target protocol has
two potential sources for a route, connected and dynamic, it will prefer
the connected source.
HTH,
-Bob Sinclair CCIE 10427
www.netmasterclass.net
naman sharma wrote:
> Hi Group,
>
> I am just too confused with redistribution default rule, can anyone help me
> on this.
>
> As per the rule when we redistribute between 2 protocols then the connected
> interfaces on which the protocol is already running will get redistributed
> into another protocol immediately.
>
> Now in case one protocol has redistribute connected with route-map
> configured this rule breaks, here is the example.
>
> Mutual Redistributing between RIP and OSPF.
> RIP running on serial0/0/0 and fa0/0 of router
> OSPF running on s0/0/1 and Fa0/1 of router.
>
> Now in case there is a redistribute connected command configured under OSPF
> with route-map then when RIP is getting redistributed into OSPF then s0/0/0
> and Fa0/0 connected interfaces will not be automatically redistributed as
> per the break in the rule and we have to manually add these interfaces under
> OSPF redistribute connected route-map.
>
> Please correct me if i am wrong.
>
> Thanks
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:21 ARST