From: lalit gupta (lalit.tech@gmail.com)
Date: Sun Oct 12 2008 - 23:42:30 ART
Unfortunately i dont have debug output now, but i checked with debug voip
dialpeer . it was matching 20 tag. then i did required translation on 20 and
call started working...
but i dont knw why 20 was matching again and again.
On Sun, Oct 12, 2008 at 7:34 PM, Paul Dardinski <pauld@marshallcomm.com>wrote:
> Interesting. Do you have the output of the deb voip dialpeer to confirm
> 20 is matching first? Normally of course incoming called is matched
> first and you have it set to default. T should also fall into default so
> I wouldn't think that would match first.
>
> PD (#16842 RS/Sec)
>
> -----Original Message-----
> From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
> lalit gupta
> Sent: Saturday, October 11, 2008 11:05 PM
> To: Cisco certification
> Subject: Dial-peer matching question
>
> Hi Experts,
>
> I have simple config . The incoming call from the PSTN are matching
> dial-peer 20 . i dont understand why ? can someone please explain.
>
> !
> dial-peer voice 20 pots
> translation-profile outgoing append
> destination-pattern .T
> port 0/1/0:23
> forward-digits all
> !
> dial-peer voice 30 pots
> incoming called-number .
> direct-inward-dial
> port 0/1/0:23
> !
>
>
> Thanks ,
> lalit
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:20 ARST