RE: VPDN - dialer PPPoE

From: Shaughn Smith (Shaughn.Smith@za.verizonbusiness.com)
Date: Wed Oct 08 2008 - 16:57:45 ART


Could you possibly do a debug ppp authentication on both routers

-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Alexandre V Oliveira
Sent: Wednesday, October 08, 2008 6:12 PM
To: ccielab@groupstudy.com
Subject: VPDN - dialer PPPoE

Gentlemen,

I've got a problem here in a PPPoE solution involving two routers
directle
connected through FastEthernet interfaces.

I need to make a VPDN connection, using PPPoE, DHCP and CHAP
authentication
method using AAA. Below, I show you both configs.

The problem is that I have no connection throughout this link. R1 start
calling R6, but there is no answer from the peer (R6). Can anyone tell
me
what could be wrong or missin here?

Thanks a lot!

Alexandre.

========================================
Topology:

R1--(f1/0)---Switch----(f1/0)-R6

----[R1]-----

vpdn enable
!
vpdn-group 1
 request-dialin
  protocol pppoe
!
interface FastEthernet0/0
 no ip address
 speed auto
 pppoe enable
 pppoe-client dial-pool-number 1
!
!
interface Dialer1
 mtu 1492
 ip address dhcp
 encapsulation ppp
 dialer pool 1
 ppp authentication chap
 ppp chap hostname ccie
 ppp chap password 0 ccie
!

----[R6]-----

!
username ccie password 0 ccie
aaa new-model
aaa authentication login default local
aaa authentication ppp PPPOE local
aaa session-id common
!
ip dhcp excluded-address 172.8.16.2 172.8.16.254
!
ip dhcp pool PPPOE
   network 172.8.16.0 255.255.255.0
!
ip cef
vpdn enable
!
vpdn-group 1
 accept-dialin
  protocol pppoe
  virtual-template 16
!
interface FastEthernet1/0
 no ip address
 duplex half
 pppoe enable
 no clns route-cache
!
interface Virtual-Template16
 ip address 172.8.16.6 255.255.255.0
 ppp authentication chap callin PPPOE
 no clns route-cache
!
END

Blogs and organic groups at http://www.ccie.net



This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:20 ARST