RE: WCCP

From: Tyson Scott (tscott@ipexpert.com)
Date: Tue Oct 07 2008 - 09:12:17 ART

Osamah,
It all depends on which interface you configure it on.

If you configure it on the interface facing router then you would use out
If you configure it on the interface facing PC1 then you would configure in

Regards,
 
Tyson Scott - CCIE #13513 R&S and Security
Technical Instructor - IPexpert, Inc.

Telephone: +1.810.326.1444
Cell: +1.248.504.7309
Fax: +1.810.454.0130
Mailto: tscott@ipexpert.com
 

 

-----Original Message-----
From: Osamah Shaheen [mailto:ShaheenO@maaden.com.sa]
Sent: Tuesday, October 07, 2008 7:56 AM
To: Tyson Scott; ccielab@groupstudy.com
Subject: RE: WCCP

Let's take a look at this:
My problem is when to use IN or OUT

Routers
  |
  |
  SW1 <----> BLUECOAT
 "WCCP"
  |
  |
 PC1

 

---------------------------------------------------------------------------- 

----

This message and any attachments are confidential and intended solely for
the use of the individual or entity to whom they are addressed. If you are
NOT the intended recipient you should not use, copy, disclose or place any
reliance on this e-mail or its contents, and immediately notify the sender
by return e-mail and delete all copies of this e-mail from your system.

Statement and opinions expressed in this e-mail are those of the sender, and
do not necessarily reflect MA'ADEN. 

postmaster@maaden.com.sa 

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST