From: Joshua (joshualixin@gmail.com)
Date: Tue Oct 07 2008 - 03:28:00 ART
Hi,
I tried to hook up my gears again to start lab preparation. I followed IEWB
physical topology and weired,
SW1 only port fa0/16-18 can up as trunk with SW3; port f10/13-15, 19-21
showed "notconnect";
SW2 only port fa0/16-18 can up as trunk with SW3, port f10/13-15, 19-21
showed "notconnect";
SW3 only port fa0/13-15, 19-21 up as trunk with SW1 and SW4, port f10/16-18
showed "notconnect";
SW4 only port fa0/19-21 up as trunk with SW3, port f10/13-15, 16-18 showed
"notconnect";
SW1, SW2 and SW4 are:
Switch>sh inv
NAME: "Switch", DESCR: "Cisco Catalyst 3550 24 10/100 baseT ports + 2 Gig
uplink
s fixed configuration Layer 2/3 Ethernet Switch"
PID: WS-C3550-24 , VID: M0 , SN: CAT0826N4G4
...
System image file is "flash:c3550-ipservicesk9-mz.122-25.SEC2.bin"
SW4 is WS-C3750-24TS
Does it because 3550 have trunk limitation, or IOS problem?
Thanks.,
Josh
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST