From: David Prall (dcp@dcptech.com)
Date: Mon Oct 06 2008 - 20:52:25 ART
Well that would be an Interim image, so it most likely is not present in the
first CCO published release. I would check with the person you got it from
to confirm what the issue is and if it is fixed in the latest release. I
found it only present in interim images, so it shouldn't be in a CCO
release.
-- http://dcp.dcptech.com> -----Original Message----- > From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of > Hash Aminu > Sent: Monday, October 06, 2008 6:30 PM > To: Cisco certification > Subject: %NAT: Error activating CNBAR on the interface Ethernet0/0 > > Hi Guys, > > Has anyone had this error message before??? it just showed its head as > soon > as I enabled NAT on the interface. > > IOS is Version 12.4(7.11)T > > Hash(config-if)#ip nat outside > %NAT: Error activating CNBAR on the interface Ethernet0/0 > Hash(config-if)#do sh run inter e0/0 > Building configuration... > > Current configuration : 105 bytes > ! > interface Ethernet0/0 > ip address 191.1.58.5 255.255.255.0 > ip nat outside > ip virtual-reassembly > end > > > TIA > > Hash > > > Blogs and organic groups at http://www.ccie.net > > _______________________________________________________________________ > Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST