From: S Malik (ccie.09@gmail.com)
Date: Sun Oct 05 2008 - 20:40:07 ART
I am not sure if I got your question right. If both links are trunk and you
want all the odd vlans passing through one interface and even vlans from the
other interface then you may try to use "sw trunk forward vlans" command and
permit vlans accordingly.
In order to select one switch as primary for odd or even vlans, set its
priority accordingly.
On 10/5/08, nouman abbasi <abbasi.nouman@gmail.com> wrote:
>
> Hi,
> I have trunk between SW1 && SW2 on ports fa 0/10 and fa 0/11 ;
>
> On SW1 how could I configure Odd Vlans on one ports and even Vlans on other
> ports
>
> ODD Vlans on fa 0/10
> EVEN Vlans on fa 0/11
>
> Assuming I have :
> Vlan 1, Vlan 10 , Vlan 11, Vlan 12, Vlan 13, Vlan 14, Vlan 15, Vlan 16,
> Vlan
> 17
>
> Regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:19 ARST