From: S Malik (ccie.09@gmail.com)
Date: Thu Oct 02 2008 - 14:22:41 ART
Make sure you are using proper DLCIs and interface numbers. I tested and it
works fine.
can you forward your configuration from both routers?
On Wed, Oct 1, 2008 at 5:57 PM, nouman abbasi <abbasi.nouman@gmail.com>wrote:
> Please if someone can try and let me know if this works for them..
> =======
>
> <<R2>>
> ========
>
> interface Serial0/0/1
> no ip address
> encapsulation frame-relay
> no frame-relay inverse-arp
> !
> interface Serial0/0/1.24 point-to-point
> no ip address
> snmp trap link-status
> frame-relay interface-dlci 224 ppp Virtual-Template1
> !
> interface Virtual-Template1
> ip address 4.4.24.2 255.255.255.0
>
>
> ========
> <<R4>>
> ========
>
> interface Serial0/0.24 point-to-point
> no ip address
> snmp trap link-status
> frame-relay interface-dlci 422 ppp Virtual-Template1
> !
> interface Virtual-Template1
> ip address 4.4.24.4 255.255.255.0
> !
>
>
>
>
>
> On Thu, Oct 2, 2008 at 12:53 AM, Ali Mousawi <mousawi.ali@gmail.com>
> wrote:
>
> > Yes true IP addresses should be configured only on the Virtual Template
> >
> > On Wed, Oct 1, 2008 at 12:56 PM, femi ogunlana <femi0802@googlemail.com
> >wrote:
> >
> >> Your IP addresses need to be configured on the virtual templates ONLY.
> >>
> >> You seem to have configured it on both serial and virtual template
> >> interfaces.
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:18 ARST