From: nouman abbasi (abbasi.nouman@gmail.com)
Date: Wed Oct 01 2008 - 18:57:04 ART
Please if someone can try and let me know if this works for them..
=======
<<R2>>
========
interface Serial0/0/1
no ip address
encapsulation frame-relay
no frame-relay inverse-arp
!
interface Serial0/0/1.24 point-to-point
no ip address
snmp trap link-status
frame-relay interface-dlci 224 ppp Virtual-Template1
!
interface Virtual-Template1
ip address 4.4.24.2 255.255.255.0
========
<<R4>>
========
interface Serial0/0.24 point-to-point
no ip address
snmp trap link-status
frame-relay interface-dlci 422 ppp Virtual-Template1
!
interface Virtual-Template1
ip address 4.4.24.4 255.255.255.0
!
On Thu, Oct 2, 2008 at 12:53 AM, Ali Mousawi <mousawi.ali@gmail.com> wrote:
> Yes true IP addresses should be configured only on the Virtual Template
>
> On Wed, Oct 1, 2008 at 12:56 PM, femi ogunlana <femi0802@googlemail.com>wrote:
>
>> Your IP addresses need to be configured on the virtual templates ONLY.
>>
>> You seem to have configured it on both serial and virtual template
>> interfaces.
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Nov 01 2008 - 15:35:18 ARST