command "no-alias" as cisco example question.

From: Edouard Zorrilla (ezorrilla@tsf.com.pe)
Date: Sun Sep 28 2008 - 23:50:21 ART

• Next message: Piotr: "Re: command "no-alias" as cisco example question."
• Previous message: Hobbs: "Re: LAN QoS"
• Next in thread: Piotr: "Re: command "no-alias" as cisco example question."
• Maybe reply: Piotr: "Re: command "no-alias" as cisco example question."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

Group :

I understand that static NAT IP can responde to arp-request, while "no-alias"
command forbidden such action. But I really do not know why in this example
they use "no-alias" in the nat command ?:

http://www.cisco.com/en/US/tech/tk583/tk372/technologies_configuration_exampl
e09186a00800b07ed.shtml

I lab it up with one static nat over a serial like this example and it works
with and without "no-alias" at the end.

Any ideas ?

Regards

Blogs and organic groups at http://www.ccie.net

• Next message: Piotr: "Re: command "no-alias" as cisco example question."
• Previous message: Hobbs: "Re: LAN QoS"
• Next in thread: Piotr: "Re: command "no-alias" as cisco example question."
• Maybe reply: Piotr: "Re: command "no-alias" as cisco example question."
• Messages sorted by: [ date ] [ thread ] [ subject ] [ author ] [ attachment ]

This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:20 ART