From: Farrukh Haroon (farrukhharoon@gmail.com)
Date: Thu Sep 25 2008 - 13:31:51 ART
Since you have filtering policies on Site1, just put a filter on the Site2.
Linksys Allow Web traffic only to the proxy (if one exists) on Site1 and
block direct connections originating from Site2 going to the internet..
This would also depend on your filtering solution? Layer2/Layer3?
Regards
Farrukh
On Thu, Sep 25, 2008 at 6:51 PM, Terry Tender <terry.tender@gmail.com>wrote:
> Hi
>
> I need to VPN across the Internet so that all my traffic (local internal
> LAN
> and Internet bound) goes through the VPN.
>
> This is how it looks:
> PC1-----Site1----VPN----Internet--------VPN----Site2----PC2
> |
> Internet public sites
>
> PC1 needs to be able to reach PC2 via the VPN.
>
> PC2 needs to be able to reach ALL the Internet public sites via the VPN.
>
> In other words no traffic should go direct to the internet - the reason is
> that at Site1 certian ports/sites are blocked etc.
>
> In total there is only PC1 and PC2 involved (Windows XP pros). So all PC1
> traffic can be just tunneled across - or for that matter all LAN traffic at
> site1 can go via the VPN.
>
> Site1 and Site2 are identical with Linksys WRV200 Business series routers
> (wireless G VPN Router with Rnag boaster).
>
> I can't see aything in GUI of the Linksys to allow me to do both things
> above. I can reach PC2 from PC1 but I can't use the Public Internet across
> the VPN.
>
> Any ideas?
>
> Thanks and regards.
> Terry
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART