From: marijo.bernardic@vanco.de
Date: Mon Sep 22 2008 - 18:35:22 ART
Hi Igor,
As far as I know you can only change the AD of ALL external routes:
Rack1R2(config-router)#distance eigrp 90 ?
<1-255> Distance for external routes
Regards
Marijo
-----UrsprC<ngliche Nachricht-----
Von: nobody@groupstudy.com [mailto:nobody@groupstudy.com] Im Auftrag von Igor
M.
Gesendet: Montag, 22. September 2008 22:15
An: ccielab@groupstudy.com
Betreff: distance for neighbor under eigrp
After some lab testing (using IOS 12.4/12.4T on C2811 and C3745) I'm led to
believe that the command
distance <distance> <ip-address> <wildcard-mask> [ip-standard-acl |
ip-extended-acl | access-list-name]
applied in "router eigrp" works only for EIGRP-internal routes.
EIGRP-external routes always get the default EIGRP admin distance for external
routes, no matter if they match an ACL or neighbor IP in the distance command.
However, I can't seem to find this behavior to be documented anywhere (at least
not in IOS 12.4 Config Guide or Command Reference Guide).
Can anyone shed light on this - is this by design, and if so, is there a way to
selectively apply AD values to external EIGRP routes?
I am aware of of the "distance eigrp" command, but this is not an option, since
I need to alter admin distance for specific external routes only.
----------------------
I.M., M.Eng. P.Eng.
Network Architect
CI Investments
----------------------
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART