From: Hobbs (deadheadblues@gmail.com)
Date: Mon Sep 22 2008 - 11:00:52 ART
It doesn't matter how your routing table is populated, IGP or static routes.
If the traffic is received on an interface that is not the rpf interface you
need the static mroute. Like Cyrus said you can use debug commands to see if
there is an rpf check.
On Mon, Sep 22, 2008 at 3:14 AM, Cyrus <cyrus.mgh@gmail.com> wrote:
> Hi,
>
> Form lab point of view, When u see RPF failure in your debug output.Say
> debug ip mroute.
>
> To solve this issue.U have 2 options ,whether tune your devices in your
> topology to reroute traffic to RPF interface or write ip mroute,so it would
> add a path to RPF check and it will flood multicast traffic.
>
>
>
> HTH,
>
> On Mon, Sep 22, 2008 at 12:49 PM, CCIE Hunter <cisco.ccie.guru@gmail.com
> >wrote:
>
> > Hi all expert.
> > I am confusing when/what kind of situation we need to use static ip
> > route(eg.ip mroute 10.1.1.1 255.255.255.255 10.2.2.2)
> >
> > I already search inside cisco and google but still can't understandable.
> >
> > Please :)
> >
> > Regards
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> >
> >
> >
> >
> >
> >
>
>
> --
> Sirus Moghadasian
> CCIE #21862 (R&S)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:19 ART