From: Truman Ford (truman.ccie@gmail.com)
Date: Wed Sep 17 2008 - 02:33:28 ART
Expert,
I am adding few logs which may be helful.
Many Thanks// Truman
--- remote command switch show platform hardware earl status ---
Superman 0 interrupt counts : Total 75556173
se_one: 0
se_hwm: 667
se_dn: 5295091
ntfy_one: 0
ntfy_hwm: 0
ntfy_ovfl: 0
ft_b0_corr_ecc: 0
ft_b0_uncorr_ecc: 0
ft_b1_corr_ecc: 0
ft_b1_uncorr_ecc: 0
ft_b0_multi_pg_hit: 0
ft_b1_multi_pg_hit: 0
l2_flush_done: 0
loop_ntfy: 0
ntfy_fifo_full: 0
l2_line_full: 0
mc_cap: 70270223
b0_invld_pg_acc: 0
b1_invld_pg_acc: 0
pkt_crc32_err: 0
cpu_par_err: 0
cpu_timeout: 0
rbus_timeout: 0
dbus_timeout: 0
ip_chksum_err: 0
l3_fcs_err: 12
dbus_seq_err: 0
dbus_hdr_err: 0
l2l3_seq_mismatch: 0
l3_rcv_ovfl_err: 0
l2_merge_err: 0
============================
Tycho Interrupts: Total - 3537371
CPU interrupt block : Total interrupts - 0
Netflow interrupt block : Total interrupts - 0
IFIFO_OVF_INT : 0
SINGLE_BIT_ECC_INT : 0
MULTI_BIT_ECC_INT : 0
ECC_DATA_CAPT_INT : 0
TCAM_THRLD_EXCD_INT : 0
ICAM_THRLD_EXCD_INT : 0
TABLE_FULL_INT : 0
ENTRY_ALIAS_INT : 0
FIB interrupt block : Total interrupts - 0
FC_FOVR_INT : 0
FC_FUDR_INT : 0
BP_FOVR_INT : 0
BP_FUDR_INT : 0
RS_FOVR_INT : 0
RS_FUDR_INT : 0
AJ_FOVR_INT : 0
AJ_FUDR_INT : 0
FB_COR_ECC_INT : 0
FB_UNCOR_ECC_INT : 0
Search interrupt block : Total interrupts - 3536262
Adj. Statistics tabl block : Total interrupts - 0
Adj. table interface block : Total interrupts - 0
AT_SEQ_ERR_INT : 0
AT_FOVR_INT : 0
AT_FUDR_INT : 0
AT_IB_ADJ_INT : 0
AT_BZONE_INT : 0
AT_CORR_ECC_ERR_INT : 0
AT_UNCORR_ECC_ERR_INT : 0
AT_ECC_ERR_DATA_CAPT : 0
Packet Parser block block : Total interrupts - 641
IP_LEN_INT : 33
IP_SHRT_INT : 0
IP_CS_INT : 620
QDBUS_CRC_INT : 0
QDBUS_LEN_INT : 0
IB_LEN_INT : 0
IB_SEC_INT : 0
Decision Engine bloc block : Total interrupts - 0
NS_ECC_SBE_INT : 0
NS_ECC_MBE_INT : 0
NS_ECC_DCE_INT : 0
ACL_SEQ_ERR_INT : 0
STAT_FOVF_INT : 0
RSLT_FOVF_INT : 0
GEM_MEM_LEAK_INT : 0
Rewrite block interr block : Total interrupts - 0
RW_VO_INT : 0
RW_VU_INT : 0
RW_RO_INT : 0
RW_RU_INT : 0
Statistics block int block : Total interrupts - 468
GLOBAL_OVFL : 0
BGP_OVFL : 468
VLAN_OVFL_0 : 0
VLAN_OVFL_1 : 0
VLAN_OVFL_2 : 0
VLAN_OVFL_3 : 0
VLAN_OVFL_4 : 0
VLAN_OVFL_5 : 0
INIT_DONE : 0
Level 4 Map interfac block : Total interrupts - 0
L4MAP_OVFL : 0
Key Queue Block inte block : Total interrupts - 0
KQ_OVFL : 0
--- remote command switch show platform hardware earl statistics ---
Superman 0 Forwarding statistics:
Forwarded Frames = 0x000000174EB82409 (100104938505)
Frames fwd'ed to Tycho = 0x000000174AA07F3D (100036280125)
L3 results rcvd = 0x000000174AA07F3D (100036280125)
Src Mac entries created in Bank 0 = 0x0000000AA11E4927 (45652789543)
Src Mac entries created in Bank 1 = 0x0000000CAD99DAE2 (54452148962)
Dst Mac entries created in Bank 0 = 0x0000000599A9A034 (24052867124)
Dst Mac entries created in Bank 1 = 0x00000011B50E83D5 (76052071381)
L2 banks congest status = 0x0000000000000000 (0)
frames redirected due to Src Mac = 0x0000000000000003 (3)
frames redirected due to Dst Mac = 0x0000000004175F33 (68640563)
Src Mac misses = 0x0000000000134572 (1262962)
Dst Mac misses = 0x00000002CC4A025E (12017336926)
line full encountered during New l = 0x0000000000000000 (0)
frames matching fid_hit reg = 0x0000000000D13796 (13711254)
frames rcvd with protocol code 0 = 0x00000013FD9195AF (85858555311)
frames rcvd with protocol code 1 = 0x0000000000955A99 (9788057)
frames rcvd with protocol code 2 = 0x0000000251E7AEF3 (9964072691)
frames rcvd with protocol code 3 = 0x000000000005A79D (370589)
frames rcvd with protocol code 4 = 0x0000000000000000 (0)
frames rcvd with protocol code 5 = 0x0000000000000000 (0)
frames rcvd with protocol code 6 = 0x0000000019AA6D2D (430599469)
frames rcvd with protocol code 7 = 0x0000000000000000 (0)
frames rcvd with protocol code 8 = 0x0000000000000000 (0)
frames rcvd with protocol code 9 = 0x0000000000000000 (0)
frames rcvd with protocol code 10 = 0x0000000000000000 (0)
frames rcvd with protocol code 11 = 0x0000000000000000 (0)
frames rcvd with protocol code 12 = 0x0000000000000000 (0)
frames rcvd with protocol code 13 = 0x0000000000000000 (0)
frames rcvd with protocol code 14 = 0x0000000000000000 (0)
frames rcvd with protocol code 15 = 0x00000000E4F97005 (3841552389)
bytes rcvd with protocol code 0 = 0x00003B1DBD4917C9 (64998915774409)
bytes rcvd with protocol code 1 = 0x000000003EBB1AEC (1052449516)
bytes rcvd with protocol code 2 = 0x0000009479F06E9B (637700959899)
bytes rcvd with protocol code 3 = 0x0000000001CA08AD (30017709)
bytes rcvd with protocol code 4 = 0x0000000000000000 (0)
bytes rcvd with protocol code 5 = 0x0000000000000000 (0)
bytes rcvd with protocol code 6 = 0x000000091C0B03BC (39125189564)
bytes rcvd with protocol code 7 = 0x0000000000000000 (0)
bytes rcvd with protocol code 8 = 0x0000000000000000 (0)
bytes rcvd with protocol code 9 = 0x0000000000000000 (0)
bytes rcvd with protocol code 10 = 0x0000000000000000 (0)
bytes rcvd with protocol code 11 = 0x0000000000000000 (0)
bytes rcvd with protocol code 12 = 0x0000000000000000 (0)
bytes rcvd with protocol code 13 = 0x0000000000000000 (0)
bytes rcvd with protocol code 14 = 0x0000000000000000 (0)
bytes rcvd with protocol code 15 = 0x0000003EC39EF07E (269569945726)
frames rate limited = 0x0000000000000000 (0)
correctable errors in bank 0 = 0x0000000000000000 (0)
uncorrectable errors in bank 0 = 0x0000000000000000 (0)
correctable errors in bank 1 = 0x0000000000000000 (0)
uncorrectable errors in bank 1 = 0x0000000000000000 (0)
DBus Header Checksum errors = 0x0000000000000000 (0)
address of the line full = 0x00000000
address of the last error in Bank0 = 0x00000080
address of the last error in Bank1 = 0x00000520
On 9/17/08, Truman Ford <truman.ccie@gmail.com> wrote:
>
> Hi Expert,
>
> I have encountered an error in cat 6509 which is non-distruptive, but I am
> interested to know what is causing this error.
> I couuld not get any document regarding this. Please share ur thoughts!!
>
>
> LOGS:
> =====
>
> Sep 13 00:45:36: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 13 01:38:54: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interrupt l3_fcs_err
>
> Sep 13 02:01:18: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 13 02:20:40: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 13 10:13:45: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 13 10:28:26: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 13 20:27:01: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 13 23:35:57: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 14 00:38:08: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
> Sep 14 02:37:13: %EARL_L2_ASIC-SP-3-INTR_WARN: EARL L2 ASIC 0: Non-fatal
> interru
>
> pt l3_fcs_err
>
>
>
> Show version
>
> ==========
>
> ------------------ show version ------------------
>
> Cisco Internetwork Operating System Software
> IOS (tm) s72033_rp Software (s72033_rp-IPSERVICESK9-VM), Version
> 12.2(18)SXF7, RELEASE SOFTWARE (fc1)
> Technical Support: http://www.cisco.com/techsupport
> Copyright (c) 1986-2006 by cisco Systems, Inc.
> Compiled Thu 23-Nov-06 09:10 by kellythw
> Image text-base: 0x01020150, data-base: 0x01021000
>
> ROM: System Bootstrap, Version 12.2(17r)S4, RELEASE SOFTWARE (fc1)
> BOOTLDR:
> INN-NDA-ODD-C1 uptime is 3 weeks, 3 days, 10 hours, 17 minutes
> Time since INN-NDA-ODD-C1 switched to active is 3 weeks, 3 days, 10 hours,
> 17 minutes
> System returned to ROM by power cycle (SP by power on)
> System restarted at 06:20:19 IST Fri Aug 22 2008
> System image file is "sup-bootdisk:s72033-ipservicesk9-vz.122-18.SXF7.bin"
>
>
> This product contains cryptographic features and is subject to United
> States and local country laws governing import, export, transfer and
> use. Delivery of Cisco cryptographic products does not imply
> third-party authority to import, export, distribute or use encryption.
> Importers, exporters, distributors and users are responsible for
> compliance with U.S. and local country laws. By using this product you
> agree to comply with applicable laws and regulations. If you are unable
> to comply with U.S. and local laws, return this product immediately.
>
> A summary of U.S. laws governing Cisco cryptographic products may be found
> at:
> http://www.cisco.com/wwl/export/crypto/tool/stqrg.html
>
> If you require further assistance please contact us by sending email to
> export@cisco.com.
>
> cisco WS-C6513 (R7000) processor (revision 1.1) with 491520K/32768K bytes
> of memory.
> Processor board ID SAL1110JSJQ
> SR71000 CPU at 600Mhz, Implementation 1284, Rev 1.2, 512KB L2 Cache
> Last reset from s/w reset
> Bridging software.
> X.25 software, Version 3.0.0.
> SuperLAT software (copyright 1990 by Meridian Technology Corp).
> TN3270 Emulation software.
> 255 Virtual Ethernet/IEEE 802.3 interfaces
> 194 Gigabit Ethernet/IEEE 802.3 interfaces
> 1917K bytes of non-volatile configuration memory.
>
> 65536K bytes of Flash internal SIMM (Sector size 512K).
> Configuration register is 0x2102
>
> Patching is not available since the system is not running from an installed
> image. To install please use the "install file" command
>
> --
> Many Thanks // Truman
>
-- warm regards, TrumanBlogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART