From: Shaughn Smith (Shaughn.Smith@za.verizonbusiness.com)
Date: Tue Sep 16 2008 - 19:10:47 ART
You need to set the mpls traffic engineering reoptimize command options
router(config)#mpls traffic-eng reoptimize ?
events Reoptimization triggers
timers Reoptimization timers
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
yungli2008@gmail.com
Sent: Wednesday, September 17, 2008 12:05 AM
To: ccielab@groupstudy.com
Subject: RE: MPLS TE command
Hi experts
Thanks for your help, it helps
I have a small problem
I am working with MPLS TE. The tunnel is up and its working properly
If I shutdown any one of explicit-path route interface then the tunnel
chose
the path-option 2
Then I no shutdown the explicit-path route interface, the tunnel still
pickup
the path-option 2 it didn't pickup the explicit path. I mean
path-option 1
If I shutdown anyone of the path-option 2 interface then tunnel protocol
is
down status is up
I mean It did not pickup the path-option 1 or 2 when i no shut all
interfaces
I appreciate your help
Regards
Li
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART