From: shiran guez (shiranp3@gmail.com)
Date: Sat Sep 13 2008 - 16:32:03 ART
notice that the switch was sync on
Redirection: * L2
* Packet Return: * L2*
*L2 mean Layer 2 redirection method, dose your cache engine support L2
redirection?*
**
*Another thing you need to notice is that the router id was set to
1.1.1.1make sure you have a route from your cache engine to your
Router ID!
*
**
*And another troubleshooting tip in the initial "HERE I AM" "I SEE YOU"
messages you need to see messages from the cache engine that ask for the
redirect assign without this no traffic will be redirected to the cache
engine.*
**
*you can see that with the debug ip wccp packets
Hope that will help you!
*
On 9/11/08, RRC <ronnieroshan@gmail.com> wrote:
>
> Ive tried a few things ~ Upgraded Cisco 3560 Switch to 12.2(44) & also
> done SDM Routing Template on switch.
>
> I_SEE_YOU and IAM_HERE packets as usual , havent got any IM_WORKING Packets
> (Just Kidding)......
>
>
>
> No traffic redirections as such ~
>
>
> SW-1#show ip wccp web-cache
> Global WCCP information:
> Router information:
> Router Identifier: 1.1.1.1
> Protocol Version: 2.0
> Service Identifier: web-cache
> Number of Service Group Clients: 1
> Number of Service Group Routers: 1
> Total Packets s/w Redirected: 0
> Process: 0
> CEF: 0
> Redirect access-list: -none-
> Total Packets Denied Redirect: 0
> Total Packets Unassigned: 0
> Group access-list: -none-
> Total Messages Denied to Group: 0
> Total Authentication failures: 0
> Total Bypassed Packets Received: 0
>
> ---------------------------------------------------
> SW-1#show ip wccp web-cache detail
> WCCP Client information:
> WCCP Client ID: 172.21.12.248
> Protocol Version: 2.0
> State: Usable
> Redirection: L2
> Packet Return: L2
> Packets Redirected: 0
> Connect Time: 00:00:31
> Assignment: MASK
> Mask SrcAddr DstAddr SrcPort DstPort
> ---- ------- ------- ------- -------
> 0000: 0x00000000 0x00000526 0x0000 0x0000
> Value SrcAddr DstAddr SrcPort DstPort CE-IP
> ----- ------- ------- ------- ------- -----
> 0000: 0x00000000 0x00000000 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0001: 0x00000000 0x00000002 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0002: 0x00000000 0x00000004 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0003: 0x00000000 0x00000006 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0004: 0x00000000 0x00000020 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0005: 0x00000000 0x00000022 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0006: 0x00000000 0x00000024 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> --More-- 0007: 0x00000000 0x00000026 0x0000 0x0000 0xAC1502F8 (
> 172.21.2.248)
> 0008: 0x00000000 0x00000100 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0009: 0x00000000 0x00000102 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0010: 0x00000000 0x00000104 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0011: 0x00000000 0x00000106 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0012: 0x00000000 0x00000120 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0013: 0x00000000 0x00000122 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0014: 0x00000000 0x00000124 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0015: 0x00000000 0x00000126 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0016: 0x00000000 0x00000400 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0017: 0x00000000 0x00000402 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0018: 0x00000000 0x00000404 0x0000 0x0000 0xAC1502F8 (172.21.2.248)
> 0019: 0x00000000 0x00000406 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0020: 0x00000000 0x00000420 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0021: 0x00000000 0x00000422 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0022: 0x00000000 0x00000424 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0023: 0x00000000 0x00000426 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0024: 0x00000000 0x00000500 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0025: 0x00000000 0x00000502 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0026: 0x00000000 0x00000504 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0027: 0x00000000 0x00000506 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0028: 0x00000000 0x00000520 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0029: 0x00000000 0x00000522 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0030: 0x00000000 0x00000524 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
> 0031: 0x00000000 0x00000526 0x0000 0x0000 0xAC1502F8 (172.21.12.248)
>
> BTW This WebCache Engine doesnt Support M/C Groups.
>
> Any help would be great.
>
> Regards
> RRC
>
>
>
> On Tue, Sep 9, 2008 at 2:31 PM, RRC <ronnieroshan@gmail.com> wrote:
>
>> Hello everyone,
>>
>> Thank You Shiran & Antonie.
>>
>> In this configuration, i have internal users connected to a L3 Port.
>> External on a VLAN ( SVI) & Web Cache connected to SVI as well.
>>
>> If as Antonie pointed out , it is a must for the switch to have a routed
>> port ( L3 ) on the switch on the same VLAN as the Cache Servers for it to
>> work , then that should do the trick.
>>
>> Ive noticed that V 12.2(37) & above dont support the " ip wccp redirect
>> out " command to explicitly let the switch know which interface to exit for
>> web traffic.
>>
>> Thanks a Tonne ,
>>
>> Will update........
>>
>> RRC
>>
>>
>> On Tue, Sep 9, 2008 at 2:01 PM, shiran guez <shiranp3@gmail.com> wrote:
>>
>>>
>>> http://www.cisco.com/en/US/docs/switches/lan/catalyst3560/software/release/12.2_44_se/configuration/guide/swwccp.html#wp1051427
>>>
>>>
>>> On Tue, Sep 9, 2008 at 1:39 PM, RRC <ronnieroshan@gmail.com> wrote:
>>>
>>>> Hello Everyone
>>>>
>>>> Yes , Shiran . Ive configured the necessary config on the Cache Engine (
>>>> IronPort)
>>>>
>>>>
>>>>
>>>>> 1) did you configured the service group to be redirected?
>>>>>
>>>> No service groups used. Im using " ip wccp web-cache".
>>>>
>>>>
>>>>> 2) did you configured on the cache engine the same?
>>>>>
>>>>
>>>> Yes configured on Cache Engine ( IP ).
>>>>
>>>>> 3) what is the status of the service group?
>>>>>
>>>> n.a
>>>>
>>>>
>>>>> 4) did you assign an acl to the service group on the Cisco 3560?
>>>>>
>>>> No acls assigned.
>>>>
>>>>> 5) do you see hits on that acl?
>>>>> No hits as ive configured "ip wccp web-cache" minus any service
>>>>> groups.
>>>>>
>>>>>
>>>>>
>>>>> On Tue, Sep 9, 2008 at 1:12 PM, RRC <ronnieroshan@gmail.com> wrote:
>>>>>
>>>>>
>>>>>> Hello Everyone,
>>>>>>
>>>>>> Ive a deployment issue with WCCP.Im implementing WCCP on 2X Cisco
>>>>>> 3560
>>>>>> switches IOS 12.2(40) AdvanceK9. Ive enabled "ip wccp web-cache
>>>>>> redirect in
>>>>>> " on the L3 Ports connected to the internal n/w from where web traffic
>>>>>> is
>>>>>> generated. Traffic to Internet flows through a port in another VLAN.
>>>>>> The
>>>>>> Cache Engine is in a sep VLAN and is assigned IP in that VLAN. WCCP
>>>>>> basic
>>>>>> communication " I See you " and "I am here " are exchanged between the
>>>>>> switch & cache engine. However no redirection traffic is flowing
>>>>>> through the
>>>>>> Cache engine.
>>>>>>
>>>>>> Could anyone throw some light on the same.
>>>>>>
>>>>>> Note the Interface ( External ) to the internet is connected to a 2nd
>>>>>> tier
>>>>>> FW which f/ws it to another FW before exiting via the Cisco router.
>>>>>>
>>>>>> Hope to receive respnse on the same
>>>>>>
>>>>>> Regards
>>>>>>
>>>>>> Rony
>>>>>>
>>>>>>
>>>>>>
>>>>>> Blogs and organic groups at http://www.ccie.net
>>>>>>
>>>>>>
>>>>>> _______________________________________________________________________
>>>>>> Subscription information may be found at:
>>>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Shiran Guez
>>>>> MCSE CCNP NCE1 CCIE #20572
>>>>> http://cciep3.blogspot.com
>>>>> http://www.linkedin.com/in/cciep3
>>>>>
>>>>>
>>>>
>>>>
>>>>
>>>
>>>
>>>
>>> --
>>> Shiran Guez
>>> MCSE CCNP NCE1 CCIE #20572
>>> http://cciep3.blogspot.com
>>> http://www.linkedin.com/in/cciep3
>>>
>>>
>>
>>
>>
>
>
-- Shiran Guez MCSE CCNP NCE1 CCIE #20572 http://cciep3.blogspot.com http://www.linkedin.com/in/cciep3Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART