From: Amir.Tahir/Wateen/Lahore (Amir.Tahir@wateen.com)
Date: Fri Sep 12 2008 - 04:27:40 ART
HI experts,
I need some clarification and also need help on the following Tasks.
Note: Following task are belong to ASET LABS and don't have sol for them
Q:- Ensure that all Per VLAN Spanning Tree parameters for active VLANs
seen on SW1 are dictated by
SW1. In addition, configure VLANS for which SW1 is root, with the
following:
SOL: make SW1 as root bridge for active vlans...
Q:- Root priority of zero (0).
Sol: will make root and assign VLANs priority 0 Please correct me if I
am wrong
Q:- An access port start-up delay, due to Spanning Tree, of 32 seconds.
SOL: ??...I know how to control for specific VLAN. In this example vlans
are not mentioned, and wondering how to do on access port.
Q:- How to Disable Spanning Tree for VLAN 13 on SW2.
SOL: ??
Q:- Assume SW2 Fa0/13 will never connect to a switch or bridge.
Configure SW2 interface Fa0/13
using a spanning-tree command such that Bridge Protocol Data Units
(BPDUs) are not sent on
the port.
Sol: configure BPDU filter of mentioned port
Q:- CLIENT AUTHENTICATION (Dot1x)
Query: while configuring aaa do we have to configure like this
- Aaa authentication dot1x login none \\ do we require this
..?
- Aaa authentication dot1x default group radius
- Radius-server host 192.168.1.10 key xyz
Thanks you for help and support.
Regards
__________________
Amir Tahir
Assistant Manager
Network Operations - Metro
Engineering Division
WATEEN TELECOM
Mob: +92-322-4002647
Email: amir.tahir@wateen.com <mailto:.tahir@wateen.com>
Website: www.wateen.com <http://www.wateen.com/>
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART