From: Hough, Earl (Earl.Hough@sarcom.com)
Date: Thu Sep 11 2008 - 06:07:10 ART
Godfather,
Your cabling is a bit off. Basically you need to cross pairs 1-2-4-5 to
4-5-1-2.
1-WO-------->-B-1
2-O--------->WB-2
3----------->---3
4-B--------->WO-4
5-WB-------->-O-5
6----------->---6
7----------->---7
8----------->---8
Don't forget that one side of your connection needs to provide clocking
and in the case of PRI, be the "network" side of the connection.
Earl Hough
#16508 (R/S,Security)
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Cisco Godfather
Sent: Thursday, September 11, 2008 2:56 AM
To: ccielab@groupstudy.com
Subject: VWIC-2MFT-T1 Connection
Hello GS,
I know its basic, but its annoying!
Am trying to connect 2 routers via back to back rollover T1 cable, am
trying to bypass the PSTN, just for some training scenarios.
The question is what cable type i need to use? can someone help me with
the wire code for making this cable.
Again its a connection between two routers via VWIC-2MFT-T1 to
VWIC-2MFT-T1 ports.
I done this but it wont work, and both pots are down!
====Cable Pins====
1-WO---------WB-1
2-O-----------B---2
3 -----------------3
4-B-----------O---4
5-WB---------WO-5
6-----------------6
7-----------------7
8-----------------8
Any idea?
Thanks in advance.
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART