From: Joseph Brunner (joe@affirmedsystems.com)
Date: Wed Sep 10 2008 - 13:55:45 ART
Sure the big ones to avoid are
-fragmentation (including creating fragments and re-assembly)
-nat translation
-access-lists with the "log" keyword
-crypto without a vpn accelerator module installed
So its more features that occur than particular commands.
"Show interface stats"
Should yield some clues
FDA-1#show int stats
FastEthernet0/0
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 7644909 539859902 14165442 1508078607
Route cache 38870521 2589299770 28792552 852555110
Total 46515430 3129159672 42957994 2360633717
FastEthernet0/1
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 187811 19021227 639487 53427905
Route cache 1348491 1938213817 830630 104362362
Total 1536302 1957235044 1470117 157790267
Serial0/0/0
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 2256437 417653140 10023713 3644007011
Route cache 42213506 1832249623 36749301 784165803
Total 44469943 2249902763 46773014 4428172814
NVI0
Switching path Pkts In Chars In Pkts Out Chars Out
Processor 0 0 0 0
Route cache 0 0 0 0
Total 0 0 0 0
Interface Tunnel0 is disabled
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of zac
anderson
Sent: Wednesday, September 10, 2008 12:42 PM
To: Cisco certification
Subject: process switching resources
Experts,
Does anyone know a resource that will tell me what commands will cause the
router to abandon CEF and switch to process switching on a certain platform?
I am interested for 7200 with NPE-G2 platform.
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:18 ART