From: Geert Nijs (Geert.Nijs@simac.be)
Date: Mon Sep 08 2008 - 06:36:14 ART
Hi Group,
I have some particular QOS questions, especially regarding ingress and outgress interfaces.
cos is a field present in dot1q links only.
If an access port is configured with:
switchport mode access
switchport access vlan 103
switchport voice vlan 203
mls qos trust cos
what happens if:
- the port receives a frame without cos header, but with DSCP set to AF41 ??
- is this considered cos 0 ? internal qos marking: DSCP 0 ?
implied: no cos header, so default cos 0
- is this considered cos 4 ? internal qos marking: DSCP CS4 ?
implied: switch used dscp_to_cos map to derive cos from dscp
and then used cos_to_dscp to get the internally used DSCP value.
- is this considered dscp41 ? internal qos marking: DSCP AF41 ?
implied: if no cos field is present, switch takes dscp field as is.
If this packet is transmitted on the uplink and dscp rewrite is enabled (default setting), this packet
will have a DSCP of 0 in the first case (loosing DSCP marking), DSCP CS4 (loosing drop probability) in the second case and DSCP AF41 in the third case (i presume no other policy-maps are present that recolor packets).
regards,
Geert
________________________________
disclaimer : http://webservices.simac.be/disclaimer.htm
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART