From: Atlanta CCIE (atlantaccie@gmail.com)
Date: Sun Sep 07 2008 - 12:22:09 ART
I know this might sound stupid but I have NO CLUE what is going on. From my
understanding when you get the encapsulation failed message its because your
L3 to L2 is broken but in my case its pretty straight forward. I have
checked every single thing, rebooted the device and what not but it keeps
giving me this stupid error. I have configured static map statements but
it's not cutting it.
Working through IEWB lab 7 Task 2.3 where they ask you to configure frame
relay connection between R1 and R2.
CONFIGS:
R1
interface Serial0/0
ip address 163.1.12.1 255.255.255.0
encapsulation frame-relay
no ip route-cache
frame-relay map ip 163.1.12.2 102 broad
no frame-relay inverse-arp
end
R2
interface Serial0/0
ip address 163.1.12.2 255.255.255.0
encapsulation frame-relay
frame-relay map ip 163.1.12.1 201 broad
no frame-relay inverse-arp
SH FRAME PVC OUTPUT
RSRack1R1#sh frame pvc
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 3 1 0 0
DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0
input pkts 10 output pkts 0 in bytes 1040
out bytes 0 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:09:58, last time pvc status changed 00:09:08
RSRack1R2#sh frame pvc
PVC Statistics for interface Serial0/0 (Frame Relay DTE)
Active Inactive Deleted Static
Local 1 0 0 0
Switched 0 0 0 0
Unused 3 1 0 0
DLCI = 201, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Serial0/0
input pkts 0 output pkts 10 in bytes 0
out bytes 1040 dropped pkts 0 in pkts dropped 0
out pkts dropped 0 out bytes dropped 0
in FECN pkts 0 in BECN pkts 0 out FECN pkts 0
out BECN pkts 0 in DE pkts 0 out DE pkts 0
out bcast pkts 0 out bcast bytes 0
5 minute input rate 0 bits/sec, 0 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
pvc create time 00:09:58, last time pvc status changed 00:09:31
SH FRAME MAP OUTPUT
RSRack1R1#sh frame map
Serial0/0 (up): ip 163.1.12.2 dlci 102(0x66,0x1860), static,
CISCO, status defined, active
RSRack1R2#sh frame map
Serial0/0 (up): ip 163.1.12.1 dlci 201(0xC9,0x3090), static,
CISCO, status defined, active
TRYING TO PING FROM R1 to R2 - DEBUG IP PACKET DETAIL
RSRack1R1#ping 163.1.12.2
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 163.1.12.2, timeout is 2 seconds:
*Mar 2 02:33:38.559: IP: tableid=0, s=163.1.12.1 (local),
d=163.1.12.2(Serial0/0), routed via RIB
*Mar 2 02:33:38.559: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, sending
*Mar 2 02:33:38.559: ICMP type=8, code=0.
*Mar 2 02:33:41.559: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, encapsulation failed
*Mar 2 02:33:41.559: ICMP type=8, code=0
*Mar 2 02:33:41.559: IP: tableid=0, s=163.1.12.1 (local),
d=163.1.12.2(Serial0/0), routed via RIB
*Mar 2 02:33:41.559: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, sending
*Mar 2 02:33:41.563: ICMP type=8, code=0.
*Mar 2 02:33:44.563: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, encapsulation failed
*Mar 2 02:33:44.563: ICMP type=8, code=0
*Mar 2 02:33:44.563: IP: tableid=0, s=163.1.12.1 (local),
d=163.1.12.2(Serial0/0), routed via RIB
*Mar 2 02:33:44.563: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, sending
*Mar 2 02:33:44.567: ICMP type=8, code=0.
*Mar 2 02:33:47.567: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, encapsulation failed
*Mar 2 02:33:47.567: ICMP type=8, code=0
*Mar 2 02:33:47.567: IP: tableid=0, s=163.1.12.1 (local),
d=163.1.12.2(Serial0/0), routed via RIB
*Mar 2 02:33:47.567: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, sending
*Mar 2 02:33:47.571: ICMP type=8, code=0.
*Mar 2 02:33:50.571: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, encapsulation failed
*Mar 2 02:33:50.571: ICMP type=8, code=0
*Mar 2 02:33:50.571: IP: tableid=0, s=163.1.12.1 (local),
d=163.1.12.2(Serial0/0), routed via RIB
*Mar 2 02:33:50.571: IP: s=163.1.12.1 (local), d=163.1.12.2 (Serial0/0),
len 100, sending
*Mar 2 02:33:50.575: ICMP type=8, code=0.
Success rate is 0 percent (0/5)
TRYING TO PING FROM R2 to R1 - DEBUG IP PACKET DETAIL
RSRack1R2#ping 163.1.12.1
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 163.1.12.1, timeout is 2 seconds:
*Mar 2 02:35:31.275: IP: tableid=0, s=163.1.12.2 (local),
d=163.1.12.1(Serial0/0), routed via FIB
*Mar 2 02:35:31.275: IP: s=163.1.12.2 (local), d=163.1.12.1 (Serial0/0),
len 100, sending
*Mar 2 02:35:31.279: ICMP type=8, code=0.
*Mar 2 02:35:33.275: IP: tableid=0, s=163.1.12.2 (local),
d=163.1.12.1(Serial0/0), routed via FIB
*Mar 2 02:35:33.275: IP: s=163.1.12.2 (local), d=163.1.12.1 (Serial0/0),
len 100, sending
*Mar 2 02:35:33.275: ICMP type=8, code=0.
*Mar 2 02:35:35.275: IP: tableid=0, s=163.1.12.2 (local),
d=163.1.12.1(Serial0/0), routed via FIB
*Mar 2 02:35:35.275: IP: s=163.1.12.2 (local), d=163.1.12.1 (Serial0/0),
len 100, sending
*Mar 2 02:35:35.275: ICMP type=8, code=0.
*Mar 2 02:35:37.275: IP: tableid=0, s=163.1.12.2 (local),
d=163.1.12.1(Serial0/0), routed via FIB
*Mar 2 02:35:37.275: IP: s=163.1.12.2 (local), d=163.1.12.1 (Serial0/0),
len 100, sending
*Mar 2 02:35:37.275: ICMP type=8, code=0.
*Mar 2 02:35:39.275: IP: tableid=0, s=163.1.12.2 (local),
d=163.1.12.1(Serial0/0), routed via FIB
*Mar 2 02:35:39.275: IP: s=163.1.12.2 (local), d=163.1.12.1 (Serial0/0),
len 100, sending
*Mar 2 02:35:39.275: ICMP type=8, code=0.
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART