RE: IEWB VOL 2 lab 13 task 9.1

From: Michael Permoda (mpermoda@hotmail.com)
Date: Sun Sep 07 2008 - 00:41:07 ART


Julio,

Configure a map statement on R1 and it will work. If you run a debug on R1 you
will see that there is an encapsulation failure.

Thanks, Mike P.> From: julio.carrasco@ya.com> To: ccielab@groupstudy.com>
Subject: IEWB VOL 2 lab 13 task 9.1> Date: Sun, 7 Sep 2008 01:25:47 +0200> >
Hi group,> > I did this task, but R4 isnot getting the ip address, I issued
the "debug ip> dhcp packet" on R1 and I can see that it offers the ip address,
R4 doesn4t get> it.> > Any one had this problem?> > Best regards,> Julio.> > >
Blogs and organic groups at http://www.ccie.net> >



This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART