From: Scott Morris (smorris@internetworkexpert.com)
Date: Mon Sep 01 2008 - 16:01:13 ART
Change your SDM? Even on a 3560, none of the commands show up until you do
so!
Scott
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Antonio Soares
Sent: Monday, September 01, 2008 2:34 PM
To: 'L. Jankok'; narbikk@gmail.com; derekc@mad.scientist.com
Cc: ccielab@groupstudy.com
Subject: RE: IPv6 traffic on 3550
How did you enabled ipv6 on your 3550 ? I have mine with 12.2(46)SE and i
don't see trace of ipv6 on it:
+++++++++++++++++++++++++++
Switch#sh ver | inc IOS
Cisco IOS Software, C3550 Software (C3550-IPSERVICESK9-M), Version
12.2(46)SE, RELEASE SOFTWARE (fc2) Switch# Switch# Switch#conf t Enter
configuration commands, one per line. End with CNTL/Z.
Switch(config)#ipv6 unicast-routing
^
% Invalid input detected at '^' marker.
Switch(config)#
+++++++++++++++++++++++++++
Anyone has any official document saying that the 3550's now support ipv6 ?
Thanks.
Regards,
Antonio Soares, CCIE #18473 (R&S)
amsoares@netcabo.pt
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of L.
Jankok
Sent: quarta-feira, 2 de Julho de 2008 22:24
To: narbikk@gmail.com; derekc@mad.scientist.com
Cc: ccielab@groupstudy.com
Subject: Re: IPv6 traffic on 3550
yes it works
Rack1SW2#show ver | inc flash
System image file is
"flash:c3550-ipservices-mz.122-44.SE1/c3550-ipservices-mz.122-44.SE1.bin"
384K bytes of flash-simulated NVRAM.
Rack1SW2#
Rack1SW2#show ipv6 protocols
IPv6 Routing Protocol is "connected"
IPv6 Routing Protocol is "eigrp 12"
Address Family Protocol EIGRP-IPv6(12)(0)
EIGRP has been shutdown
EIGRP metric weight K1=1, K2=0, K3=1, K4=0, K5=0
EIGRP maximum hopcount 100
EIGRP maximum metric variance 1
EIGRP NSF-aware route hold timer is 240
Topologies : 0(base)
Interfaces:
Redistribution:
None
Maximum path: 16
Distance: internal 90 external 170
Rack1SW2#
HTH
On Wed, 2 Jul 2008 14:20:57 -0700
"Narbik Kocharians" <narbikk@gmail.com> wrote:
: i think the latest version of IOS on 3550s offer IPv6, please don't kill
me
: if this is not true, but i think i heard it some where. Check it out
:
: On Wed, Jul 2, 2008 at 2:03 PM, Derek Chan <derekc@mad.scientist.com>
wrote:
:
:> I am trying to get IPv6 running across two 3550s to a 3560. I know I can
:> use :> fallback switching on 3550. However I can make it work. Could
someone help :> me?
:>
:> Here are the network connections diagram and configurations:
:>
:> |R4|fa0/1 -- fa0/4|SW4|fa0/21 -- fa0/21|SW3| fa0/16 -- fa0/16|SW2|fa0/6
-- :> fa0/0|R6| :> :> (VLAN 46 is already created and working) :> :> R4 :> int fa0/1 :> ipv addr 2001:CC1E:16:46::4/64 :> ! :> :> R6 :> int fa0/0 :> ipv addr 2001:CC1E:16:46::6/64 :> ! :> :> SW2 (3560) :> bridge 1 protocol vlan-bridge :> int vlan 46 :> bridge-group 1 :> ! :> int fa0/6 :> no switchp :> bridge-group 1 :> ! :> :> SW3 (3550) :> bridge 1 protocol vlan-bridge :> int vlan 46 :> bridge-group 1 :> ! :> :> SW4 (3550) :> bridge 1 protocol vlan-bridge :> int vlan 46 :> bridge-group 1 :> ! :> int fa0/4 :> no switchport :> bridge-group 1 :> ! :> :> :> _______________________________________________________________________ :> Subscription information may be found at: :> http://www.groupstudy.com/list/CCIELab.html :> :> :> :> :> : : : -- : Narbik Kocharians : CCSI#30832, CCIE# 12410 (R&S, SP, Security) : www.Net-Workbooks.com : Sr. Technical Instructor : : : _______________________________________________________________________ : Subscription information may be found at: : http://www.groupstudy.com/list/CCIELab.html : : : :
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART