From: raul raul (juvenn@hotmail.com)
Date: Mon Sep 01 2008 - 11:09:04 ART
ya ; you are right ; but during the real lab ; they wan us to think ......not only apply or remeber by hard
"PIM Version 1, together with the Auto-RP feature, can perform the same tasks as the PIM Version 2 BSR" <----extract from CISCO
> Date: Sun, 31 Aug 2008 12:02:36 +0100> From: paul.cosgrove@heanet.ie> To: juvenn@hotmail.com> CC: taurusadnan19@gmail.com; pgstephan@gmail.com; shaheeno@maaden.com.sa; ccie_rs@rocketmail.com; ccielab@groupstudy.com> Subject: Re: pim Version 2??> > Will depend on what else the question says. If you have to use only> PIMv2 to propagate RP information automatically, then use BSR. AutoRP> uses UDP rather than PIMv2 packets.> > If a question only asks you to configure only PIMv2 and does not state> that you have to propagate the information automatically, to my mind you> could also use static definitions. Note that this does not mean that the> people writing the questions share my interpretation, so you have to use> your own judgement.> > Personally I think some practice questions are a little too vague about> this, and you could even argue a case for using PIMv2 with Dense Mode> for some of them. Questions are not always as clear as they as intended,> mistakes happen in this w!
orld. You should consider the full scenario and> think about what the intention was behind the question, not just what> scope the question provides you with. In the lab, ask the proctor and> they will clear up any ambiguities.> > Paul.> > raul raul wrote:> >> > Hi Paul ;> >> > PIM Version 1, together with the Auto-RP feature, can perform the same> > tasks as the PIM Version 2 BSR> >> > if i remeber correctly ; Brian mention this ; Pim ver1.5 is auto RP;> > Pim Ver2 is BSR> >> > If Question ask for pim version 2 only ; what should we do ?> >> > BSR ?> >> > Thanks> >> >> > > Date: Sat, 30 Aug 2008 14:40:24 +0100> > > From: paul.cosgrove@heanet.ie> > > To: juvenn@hotmail.com> > > CC: taurusadnan19@gmail.com; pgstephan@gmail.com;> > shaheeno@maaden.com.sa; ccie_rs@rocketmail.com; ccielab@groupstudy.com> > > Subject: Re: pim Version 2??> > >> > > Hi Raul,> > >> > > Saying "PIMv2 is BSR" is perhaps a little too simplistic, "BSR is part> > > of the PIM(v2) Sparse Mode standard" ma!
y be more accurate.> > >> > > PIM version 2 relates to the for!
mat and
useage of the PIM packets, and> > > was originally defined as part of RFC2362 (PIM-SM), later also being> > > used/extended in RFC3973 for PIM-DM. Both of these were classed as> > > experimental RFCs and have since been deprecated. The same pim version> > > number was used by both SM & DM, but BSR is obviously not relevant to> > > dense mode at all, so was only mentioned in 2362.> > >> > > The first real standard was RFC 4601 (PIM-SM) and BSR has since been> > > updated by RFC 5059 "BSR Mechanism for PIM". Because DM and PIMv1 are> > > dead, PIMv2 is often used to mean the current PIM-SM standard (as in> > > your reply); this defines BSR and also gives the options of statically> > > defining and embedding RP info. It does NOT define AutoRP, so may rule> > > out use of AutoRP depending on the question.> > >> > > Paul.> > >> > > raul raul wrote:> > > > Pim Ver 2 is BSR ....> Date: Sat, 30 Aug 2008 15:29:47 +0500>> > From: taurusadnan19@gmail.com> To: pgstephan@gmail.com> Subje!
ct: Re:> > pim Version 2??> CC: ShaheenO@maaden.com.sa; ccie_rs@rocketmail.com;> > ccielab@groupstudy.com> > Dear group members:-> can i ask Auto-rp with> > sparse-dense mode to PIM VERSION 2> > your reply will help me alot>> > Regards> > > On Sat, Aug 30, 2008 at 12:43 PM, Peter Stephan> > <pgstephan@gmail.com> wrote:> > > I would rather say that PIM v2 means> > BSR.> >& gt; > -----Original Message-----> > From:> > nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of> >> > Osamah Shaheen> > Sent: Saturday, August 30, 2008 11:01> > To: MANAN;> > ccielab@groupstudy.com> > Subject: RE: pim Version 2??> >> > PIM v2> > means pim sparse and dense mode> > To configure it> >> > Int f0/0> >> > Ip pim sparse-dense-mode> >> >> > Hope this make sense> >> > Osamah>> > >> > -----Original Message-----> > From: nobody@groupstudy.com> > [mailto:nobody@groupstudy.com] On Behalf Of> > MANAN> > Sent:!> > > 2!> > > > 008-08-30 09:57> > To: ccielab@groupstudy.com> > Subject: pim> >!
Version 2??> >> > Hello to all group members:-> > i want to k!
now what
> > is PIM version> > 2??> > can any body tell me about pim version 2 how> > to configure it.> > if Any Web link please send it to me.> >> >> > Regards > >> >> > Blogs and organic groups at http://www.ccie.net> >>> > >> > _______________________________________________________________________>> > > Subscription information may be found at:> >> > http://www.groupstudy.com/list/CCIELab.html> >> >> >> >> >> >> >> >>> > >> >> >> > ---------------------------------------------------------------------------->> > > ----> >> >> > This message and any attachments are confidential and> > intended solely for> > the use of the individual or entity to whom> > they are addressed. If you are> > NOT the intended recipient you> > should not use, copy, disclose or place any> > reliance on this e-mail> > or its contents, and immediately notify the sender> > by return e-mail> > and delete all copies of this!> > > e!> > > > -mail from your system.> >> > Statement and opinions expressed!> > > > i!
n this> > > >> > > > e-mail are those of the sender,> > and> > do not necessarily> > reflect MA'ADEN.> >> > postmaster@maaden.com.sa> >> >> > Blogs and> > organic groups at http://www.ccie.net> >> >> > _______________________________________________________________________>> > > Subscription information may be found at:> >> > http://www.groupstudy.com/list/CCIELab.html> >> >> > Blogs and organic> > groups at http://www.ccie.net> >> >> > _______________________________________________________________________>> > > Subscription information may be found at:> >> > http://www.groupstudy.com/list/CCIELab.html> > > Blogs and organic> > groups at http://www.ccie.net> >> > _______________________________________________________________________>> > Subscription information may be found at: >> > http://www.groupstudy.com/list/CCIELab.html> > > > > > >> > > > ________________________ _________________________________________> > > > Easily publish your photos to your Spaces with Photo G!
allery.> > > > http://get.live.com/photogallery/overview> > > !
>> > > >
> > > > Blogs and organic groups at http://www.ccie.net> > > >> > > >> > _______________________________________________________________________> > > > Subscription information may be found at:> > > > http://www.groupstudy.com/list/CCIELab.html> > >> > >> > > Blogs and organic groups at http://www.ccie.net> > >> > > _______________________________________________________________________> > > Subscription information may be found at:> > > http://www.groupstudy.com/list/CCIELab.html> > >> > >> > >> > >> > >> > >> > >> >> >> > ------------------------------------------------------------------------> > Enrich your blog with Windows Live Writer. Windows Live Writer> > <http://get.live.com/writer/overview>> > > Blogs and organic groups at http://www.ccie.net> > _______________________________________________________________________> Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html> > > > > > >
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART