From: akyccie (akyccie@gmail.com)
Date: Mon Sep 01 2008 - 03:20:20 ART
right, but how to find routes advertised to eigrp neighbor, if you can don't
have access to neighbor router. Same command works fine in case of RIP "debug
ip rip''.
----- Original Message -----
From: Pavlo Bykov
To: akyccie
Cc: ccielab@groupstudy.com
Sent: Monday, September 01, 2008 11:36 AM
Subject: Re: Route advertise to eigrp neighbors
Well it should be what you see under "show ip route eigrp"
On Mon, Sep 1, 2008 at 8:04 AM, akyccie <akyccie@gmail.com> wrote:
How to find routes advertised to eigrp neighbors. "debug ip eigrp" show
only
the route installed in the routing table.
R1#
*Mar 1 00:11:28.599: IP-EIGRP(Default-IP-Routing-Table:100): route
installed
for 10.1.1.4 ()
*Mar 1 00:11:28.599: IP-EIGRP(Default-IP-Routing-Table:100): route
installed
for 10.2.1.0 ()
*Mar 1 00:11:28.599: IP-EIGRP(Default-IP-Routing-Table:100): route
installed
for 10.2.3.0 ()
Blogs and organic groups at http://www.ccie.net
_______________________________________________________________________
Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html
--
Pavlo Bykov
-------------------------------------------------
Stop the braindumps!
http://www.stopbraindumps.com/
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Sat Oct 04 2008 - 09:26:17 ART