OT : Integrating CME with Cisco Unity 4.2

From: KC (kanwal.chawla@gmail.com)
Date: Sun Aug 31 2008 - 17:58:46 ART


Hi

I am trying to integrate CME with Cisco Unity4.2 . CME is in Bracnch
location - +65-65555... and Unity4.2 is in HQ location( HQ - 4153333...)
CME location is configured with 8 digits rather than 10.

Here is the BR2 configuration. I have configured Transcoder. But still
whenever i dial 5300(voicemail),, i just gets busy tone. I think i dont need
dial-peer for 5300 destination, but if i even configure i am still getting
busy tone

BR2# sh run
Building configuration...
Current configuration : 7487 bytes
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname BR2
!
boot-start-marker
boot-end-marker
!
enable password cisco
!
no aaa new-model
!
resource policy
!
network-clock-participate slot 1
voice-card 1
 dspfarm
 dsp services dspfarm
!
ip cef
!
!
no ip dhcp use vrf connected
ip dhcp excluded-address 10.130.0.1 10.130.0.230
!
ip dhcp pool BR2
   network 10.130.0.0 255.255.255.0
   default-router 10.130.0.1
   option 150 ip 10.130.0.1
   lease 8
!
!
no ip domain lookup
!
!
!
isdn switch-type primary-net5
!
!
!
voice service voip
 allow-connections h323 to h323
 allow-connections h323 to sip
 allow-connections sip to h323
!
!
!
voice class codec 1
 codec preference 1 g729r8
 codec preference 2 g711ulaw
!
!
!
!
!
!
!
!
voice translation-rule 1
 rule 1 /^3\(...\)/ /14153333\1/
 rule 2 /^4\(...\)/ /12124444\1/
 rule 3 /^900\(1*\)/ /\1/
!
voice translation-profile A
 translate called 1
!
!
!
!
!
application
 service queue flash:app-b-acd-2.1.0.0.tcl
  param queue-len 15
  param aa-hunt1 5555
  param number-of-hunt-grps 1
  param queue-manager-debugs 1
 !
 service aa flash:app-b-acd-aa-2.1.0.0.tcl
  paramspace english index 1
  param pilot 5010
  param number-of-hunt-grps 1
  paramspace english lang en
  param handoff-string aa
  param dial-by-extension-option 1
  paramspace english location flash:
  param second-greeting-time 60
  param welcome-prompt en_bacd_welcome.au
  param call-retry-timer 15
  param voice-mail 3300
  param service-name queue
 !
!
!
!
controller E1 1/0
 pri-group timeslots 1-3,16
!
controller E1 1/1
!
!
!
!
!
interface Loopback0
 ip address 10.10.32.3 255.255.255.255
 ip ospf network point-to-point
!
interface FastEthernet0/0
 no ip address
 duplex auto
 speed auto
!
interface FastEthernet0/0.30
 description BR2 Data Vlan 30
 encapsulation dot1Q 30
 ip address 10.30.0.1 255.255.255.0
 no snmp trap link-status
!
interface FastEthernet0/0.130
 description BR2 Voice Vlan 130
 encapsulation dot1Q 130
 ip address 10.130.0.1 255.255.255.0
 no snmp trap link-status
 h323-gateway voip interface
 h323-gateway voip id NLI-1 ipaddr 10.10.32.1 1719
 h323-gateway voip h323-id CME
 h323-gateway voip tech-prefix 65
 h323-gateway voip bind srcaddr 10.130.0.1
!
interface Serial0/0
 no ip address
 encapsulation frame-relay IETF
 no fair-queue
 frame-relay lmi-type ansi
!
interface Serial0/0.1 point-to-point
 ip address 10.10.33.130 255.255.255.128
 frame-relay interface-dlci 102
!
interface FastEthernet0/1
 no ip address
 shutdown
 duplex auto
 speed auto
!
interface Serial1/0:15
 no ip address
 encapsulation hdlc
 isdn switch-type primary-net5
 isdn incoming-voice voice
 no cdp enable
!
interface Service-Engine2/0
 ip unnumbered FastEthernet0/0.130
 service-module ip address 10.130.0.2 255.255.255.0
 service-module ip default-gateway 10.130.0.1
!
router ospf 1
 log-adjacency-changes
 network 10.10.32.3 0.0.0.0 area 0
 network 10.10.33.128 0.0.0.127 area 0
 network 10.30.0.0 0.0.0.255 area 0
 network 10.130.0.0 0.0.0.255 area 0
!
ip route 10.130.0.2 255.255.255.255 Service-Engine2/0
!
!
ip http server
no ip http secure-server
!
!
!
!
tftp-server flash:P003-07-4-00.bin
tftp-server flash:P003-07-4-00.sbn
tftp-server flash:P00307020200.bin
tftp-server flash:P00307020200.loads
tftp-server flash:P00307020200.sb2
tftp-server flash:P00307020200.sbn
tftp-server flash:P00403020214.bin
!
control-plane
!
!
!
voice-port 1/0:15
!
!
!
sccp local FastEthernet0/0.130
sccp
sccp ccm 10.130.0.1 priority 1
!
dspfarm transcoder maximum sessions 4
dspfarm confbridge maximum sessions 1
dspfarm
!
!
dial-peer voice 1 pots
 incoming called-number .
 direct-inward-dial
 port 1/0:15
!
dial-peer voice 2 pots
 preference 2
 destination-pattern 3...
 port 1/0:15
 prefix 0014153333
!
dial-peer voice 3 pots
 preference 2
 destination-pattern 9001415.......
 port 1/0:15
 forward-digits 13
!
dial-peer voice 4 pots
 preference 2
 destination-pattern 9001212.......
 port 1/0:15
 forward-digits 13
!
dial-peer voice 5 pots
 preference 2
 destination-pattern 4...
 port 1/0:15
 prefix 0112124444
!
dial-peer voice 6 pots
 destination-pattern 999
 port 1/0:15
 forward-digits 3
!
dial-peer voice 7 pots
 destination-pattern 9999
 port 1/0:15
 forward-digits 3
!
dial-peer voice 8 pots
 destination-pattern 9[3689].......
 port 1/0:15
 forward-digits 8
!
dial-peer voice 9 pots
 destination-pattern 900T
 port 1/0:15
 prefix 00
!
dial-peer voice 21 voip
 incoming called-number .
 dtmf-relay h245-alphanumeric
!
dial-peer voice 22 voip
 translation-profile outgoing A
 destination-pattern 3...
 voice-class codec 1
 session target ras
 dtmf-relay h245-alphanumeric
!
dial-peer voice 23 voip
 translation-profile outgoing A
 destination-pattern 9001415.......
 voice-class codec 1
 session target ras
 dtmf-relay h245-alphanumeric
!
dial-peer voice 24 voip
 translation-profile outgoing A
 destination-pattern 9001212.......
 voice-class codec 1
 session target ras
 dtmf-relay h245-alphanumeric
!
dial-peer voice 25 voip
 translation-profile outgoing A
 destination-pattern 4...
 voice-class codec 1
 session target ras
 dtmf-relay h245-alphanumeric
!
dial-peer voice 901 pots
 service aa
 destination-pattern 5010
 incoming called-number 5010
 direct-inward-dial
 port 1/0:15
!
dial-peer voice 5300 voip
destination-pattern 5300
session protocol sipv2
session target ipv4:10.1.200.22(address of unity)
codec g711ulaw
no vad
!
num-exp 6565555... 5...
num-exp 65556... 965556...
num-exp 6565555010 65555010
num-exp 65555... 5...
gateway
 timer receive-rtp 1200
!
!
!
!
gatekeeper
 shutdown
!
!
telephony-service
 load 7910 P00403020214
 load 7960-7940 P00307020200
 max-ephones 10
 max-dn 50
 ip source-address 10.130.0.1 port 2000
 auto assign 1 to 5
 timeouts interdigit 3
 sdspfarm units 2
 sdspfarm transcode sessions 4
 sdspfarm tag 1 MTP001360f655a0
 sdspfarm tag 2 CFB001360F655A0
 time-format 24
 create cnf-files version-stamp Jan 01 2002 00:00:00
 dialplan-pattern 1 65555... extension-length 4
 voicemail 5300
 max-conferences 2 gain -6
 call-forward pattern .T
 moh music-on-hold.au
 web admin system name admin password cisco
 dn-webedit
 time-webedit
 transfer-system full-consult
 transfer-pattern .T
 secondary-dialtone 9
!
!
ephone-dn 1 dual-line
 number 5001
 call-forward busy 5300
 call-forward noan 5300 timeout 6
!
!
ephone-dn 2 dual-line
 number 5002
 call-forward busy 5300
 call-forward noan 5300 timeout 6
!
!
ephone-dn 3 dual-line
 number 5003
 call-forward busy 5300
 call-forward noan 5300 timeout 6
!
!
ephone-dn 4 dual-line
 number 5301
 name VM Port 1
 call-forward busy 5302
 call-forward noan 5300 timeout 18
!
!
ephone-dn 5 dual-line
 number 5302
 name VM Port 3
 call-forward busy 5300
 call-forward noan 5300 timeout 18
!
!
ephone-dn 6
 number 5303
 name MWI only
!
ephone-dn 10
 number 5310 secondary 5311
 mwi on-off
!
!
ephone 1
 mac-address 0016.460D.F9ED
 type 7960
 button 1:1
!
!
!
ephone 2
 mac-address 0030.94C2.8E5B
 type 7960
 button 1:2
!
!
!
ephone 3
 mac-address 0015.C5C8.3D24
 type 7960
 button 1:3
!
!
!
ephone 4
!
!
!
ephone 5
!
!
!
ephone 6
 vm-device-id CiscoUM-VI1
 button 1:4
!
!
!
ephone 7
 vm-device-id CiscoUM-VI2
 button 1:5
!
!
!
ephone 8
 vm-device-id CiscoUM-VI3
 button 1:6
!
!
ephone-hunt 1 sequential
 pilot 5555
 list 5001, 5002
 final 5003
 timeout 6
!
!
!
line con 0
 exec-timeout 0 0
line 65
 no activation-character
 no exec
 transport preferred none
 transport input all
 transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
line aux 0
line vty 0 4
 exec-timeout 0 0
 password cisco
 login
!
!
end
BR2#

================================

BR2#sh sccp all
SCCP Admin State: UP
Gateway IP Address: 10.130.0.1
Switchover Method: IMMEDIATE, Switchback Method: GUARD_TIMER
Switchback Guard Timer: 1200 sec, IP Precedence: 5
Max Supported MTP sessions: 0
User Masked Codec list: None
Transcoding Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.130.0.1, Port Number: 2000
TCP Link Status: CONNECTED
Conferencing Oper State: ACTIVE - Cause Code: NONE
Active Call Manager: 10.130.0.1, Port Number: 2000
TCP Link Status: CONNECTED
Call Manager: 10.130.0.1, Port Number: 2000
                Priority: 1, Version: 3.1 or Higher
SCCP Transcoding Application Statistics:
TCP packets rx 564, tx 567
Unsupported pkts rx 1, Unrecognized pkts rx 0
Register tx 1, successful 1, rejected 0, failed 0
KeepAlive tx 562, successful 562, failed 0
OpenReceiveChannel rx 0, successful 0, failed 0
CloseReceiveChannel rx 0, successful 0, failed 0
StartMediaTransmission rx 0, successful 0, failed 0
StopMediaTransmission rx 0, successful 0, failed 0
MediaStreamingFailure rx 0
Switchover 0, Switchback 0
SCCP Conferencing Application Statistics:
TCP packets rx 563, tx 567
Unsupported pkts rx 0, Unrecognized pkts rx 0
Register tx 1, successful 1, rejected 0, failed 0
KeepAlive tx 562, successful 562, failed 0
OpenReceiveChannel rx 0, successful 0, failed 0
CloseReceiveChannel rx 0, successful 0, failed 0
StartMediaTransmission rx 0, successful 0, failed 0
StopMediaTransmission rx 0, successful 0, failed 0
MediaStreamingFailure rx 0
Switchover 0, Switchback 0

Total number of active session(s) 0, and connection(s) 0

=========================================================

-- 
Kanwal Chawla
408-881-3209

Blogs and organic groups at http://www.ccie.net



This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:33 ART