From: Pavlo Bykov (slidersv@gmail.com)
Date: Sun Aug 31 2008 - 14:01:42 ART
Hi Tom.
No, you issue a "send *" on the TS
and then start typing the commands line by line.
So for example if I wasnt time on ALL of my devices to be set at 8:00 am, I
would go to TS # mode, and type
send *
clock set 8am
^Z
the Z is for send. (clock is an example, we all know the syntax)
Regards,
Pavlo
On Sun, Aug 31, 2008 at 6:53 PM, TCP IP4 <tcp.ip4@gmail.com> wrote:
> Hi Lei,
>
> Can you explain more how to use ts to apply the same configuration to all
> devices? Do you mean go to each terminal and do the cut-n-paste?
>
> Thanks,
> Tom
>
> On Sun, Aug 31, 2008 at 4:58 AM, lei tian <again.tl@gmail.com> wrote:
>
> > Hi Anbu,
> >
> > My personal experience on how to speed up,
> > 1 Use notepad. Build configuration in notepad, and then copy/paste to
> > device.
> > 2 Use TS. Use teminal server to save configuration and do all the stuff
> you
> > need apply to all devices
> > 3 Read first. Fox example, OSPF. Read all tasks regarding ospf and then
> > think about the solution, so you dont need to come back to same box over
> > and
> > over.
> > 4 Use show run | sec on routers.
> >
> > HTH,
> >
> > Lei
> >
> > On Sat, Aug 30, 2008 at 11:32 PM, CCIE3000 <ccie3000@googlemail.com>
> > wrote:
> >
> > > For sure do a layer two.
> > >
> > > I follow the IE method from the lab set up. Four boxes for your
> switches
> > in
> > > a diamond shape, Sw1 left, SW3 top sw4 right, sw2 bottom.
> > >
> > > Show connections from routers to switches and mark whether trunk or
> which
> > > vlan it should be. plus any special things concerning your interswitch
> > > links. It should take between 5-10 minutes and closer to 5. You may not
> > > ALWAYS need it but I'd bet you need it more times than not.
> > >
> > > No matter how prepared you are unless you are ultra cool (and in my
> eyes
> > to
> > > be ultra cool in the lab you must be under the influence of something
> :)
> > )
> > > you heart beat is going to be up and you are going to be a little edgy
> > > (which is a good thing, keeps ya sharp) you will have lots of things
> > going
> > > on in your head thinking things through, don't leave anything to
> chance,
> > > have it down on paper and as an easy reference. You will be tired
> towards
> > > the afternoon and should you face a problem it's better to have a
> diagram
> > > to
> > > hand than try and think things through from memory.
> > > You should be aiming to have read the lab and drawn your diagrams
> within
> > 30
> > > mins to 45. But then again it's better to spend an extra 10 minutes and
> > get
> > > it right.
> > >
> > > My enlightenment was to use alias' e.g.
> > >
> > > cc for conf t
> > > ss for show run | section
> > >
> > > etc..etc...You must remove the alias before the end of the exam but I
> > noted
> > > on my last attempt, I felt good, my nerves were in normal levels but
> for
> > > the
> > > life of me I kept making silly typing mistakes which were driving me
> > > crazy...and normally I can touch type okay. Add up the amount of repeat
> > > commands I made and they start to eat into your overall time.
> > >
> > > You just have to do lab after lab after lab after lab after lab...you
> get
> > > the idea.
> > >
> > > When I first start one lab could take me 4-5 days. Now I average 4-5
> > hours.
> > >
> > > Good luck.
> > >
> > > Si
> > >
> > >
> > > On 8/30/08, Adam Elghafri <ccie.adam@gmail.com> wrote:
> > > >
> > > > ok for me...
> > > >
> > > >
> > > > I DON'T drow a L2 topology (the physical ethernet, more accurately)
> > > unless
> > > > i
> > > > see:
> > > >
> > > > "make sure vlan 73 is pruned where it is necessery"
> > > > or "both the trunks between SW1 and SW2 should balance the traffic of
> > > vlans
> > > > 15 and 20"
> > > > or something else where u want to track the spanning of the vlans
> > across
> > > > your trunks...
> > > >
> > > > otherwise its useless and wast of 20 minutes.. u only need to have a
> > good
> > > > utilization of the L3 topology (the logical mixed up, more
> > > accurately)....
> > > >
> > > > now for reading the lab .. again.. after investigating with ppl who
> > > > passed..
> > > > here what i concluded:
> > > > -don't read the entire thing word by word as u r trying to solve...
> or
> > > else
> > > > it will be harmful !!!!.. yes.. if i do that.. then when i go back to
> > do
> > > > the
> > > > lab from the beginning i just do it without thinking... i just loose
> > the
> > > > concentration while doing it and fall in mistakes !!!!
> > > >
> > > > exactly when u come "very" prepared to a class...
> > > >
> > > >
> > > > so my advice.. make the reading not to exceed 10 to 15 minutes.. or a
> > > slow
> > > > skimming ..
> > > >
> > > > Footnote: i dont have a ccie number.. so what i say are just
> > conclusions
> > > to
> > > > my "studies" experience ....
> > > >
> > > > On Sun, Aug 31, 2008 at 12:19 AM, KS Anpu <ksanpu@gmail.com> wrote:
> > > > > I have one more month to sit the lab. Still it is very difficult to
> > > read
> > > > the
> > > > > full lab and draw the L2 diagram and short notes before start the
> > lab.
> > > it
> > > > is
> > > > > taking nearly more than one hour . So i am expecting your advice /
> > help
> > > > how
> > > > > can i speed up it ? and is there any other good practice to follow
> > for
> > > > speed
> > > > > up..... other than using alias , tclsh for ping .
> > > > >
> > > > > Regards,
> > > > > anbu.
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > Adam - Dubai
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
> _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:33 ART