From: KC (kanwal.chawla@gmail.com)
Date: Thu Aug 28 2008 - 11:54:58 ART
Hi paul
It happens sometimes. i would suggest to either disable/enable port again
and if doesnt sort out the problem , then either reboot the entire switch or
reset the hardware module- command would be either - reset <mod> or reset
mod <mod>
There can be one more problem. One reason can also be ip helper-address
problem in your Router who is forwarding your request to CCM. Check that out
if that is present as well.
Thanks
KC
On Thu, Aug 28, 2008 at 6:48 AM, Paul Dardinski <pauld@marshallcomm.com>wrote:
> Working on 6608, basically trying to bring up PRI-T1. Below see my sh
> ver. As you can see port 2 (conf) and 3(pri) are fine, but port 1 won't
> register with ccm even though configured identical to port 3. Does
> anyone out there know how to force (reset) a 6608 port (or entire
> module) back to factory default? Is there such a thing? I have tried
> removing all configs, resetting entire module and switch (adding back
> the single set voice command to the port).....
>
> Thanks in advance,
>
> Paul (#16842 RS/Sec)
>
>
>
>
>
> Console> (enable) sh ver
>
> WS-C6506 Software, Version NmpSW: 7.6(17)
>
> Copyright (c) 1995-2006 by Cisco Systems
>
> NMP S/W compiled on Mar 13 2006, 13:02:10
>
>
>
> System Bootstrap Version: 5.3(1)
>
> System Boot Image File is 'slot0:cat6000-supk8.7-6-17.bin'
>
> System Configuration register is 0x10f
>
>
>
> Hardware Version: 2.0 Model: WS-C6506 Serial #: TBA04300146
>
>
>
> PS1 Module: WS-CAC-1300W Serial #: SON04360090
>
>
>
> Mod Port Model Serial # Versions
>
> --- ---- ------------------- -----------
> --------------------------------------
>
> 1 2 WS-X6K-SUP1A-2GE SAD043002YT Hw : 3.2
>
> Fw : 5.3(1)
>
> Fw1: 5.1(1)CSX
>
> Sw : 7.6(17)
>
> Sw1: 7.6(17)
>
> WS-F6K-PFC SAD04280Z86 Hw : 1.1
>
> Sw :
>
> 2 2 WS-X6K-SUP1A-2GE SAD042600PA Hw : 3.2
>
> Fw : 5.3(1)
>
> Fw1: 5.1(1)CSX
>
> Sw : 7.6(17)
>
> Sw1: 7.6(17)
>
> WS-F6K-PFC SAD042701WT Hw : 1.1
>
> Sw :
>
> 3 48 WS-X6348-RJ-45 SAL0621116R Hw : 6.1
>
> Fw : 5.4(2)
>
> Sw : 7.6(17)
>
> WS-F6K-VPWR Hw : 1.0
>
> Sw : 1.0
>
> 4 48 WS-X6348-RJ-45 SAD042709G9 Hw : 1.1
>
> Fw : 5.3(1)
>
> Sw : 7.6(17)
>
> 5 8 WS-X6608-T1 SAD0812087Z Hw : 1.5
>
> Fw : 5.4(2)
>
> Sw : 7.6(17)
>
> HP1: M00104000004; DSP1:
> M002E031 (3.3.
>
> 2)
>
> HP2: C00104000001; DSP2:
> C002E031 (3.3.
>
> 2)
>
> HP3: D00404000031; DSP3:
> D0054322 (4.3.
>
> 222)
>
> HP4: C00104000001; DSP4:
> C002E031 (3.3.
>
> 2)
>
> HP5: C00104000001; DSP5:
> C002E031 (3.3.
>
> 2)
>
> HP6: M00104000004; DSP6:
> M002E031 (3.3.
>
> 2)
>
> HP7: M00104000004; DSP7:
> M002E031 (3.3.
>
> 2)
>
> HP8: M00104000004; DSP8:
> M002E031 (3.3.
>
> 2)
>
> 15 1 WS-F6K-MSFC SAD04280F89 Hw : 1.4
>
> Fw : 12.1(27b)E1
>
> Sw : 12.1(27b)E1
>
>
>
> DRAM FLASH NVRAM
>
> Module Total Used Free Total Used Free Total Used Free
>
> ------ ------- ------- ------- ------- ------- ------- ----- ----- -----
>
> 1 65408K 47124K 18284K 16384K 15987K 397K 512K 250K 262K
>
> 2 65408K
>
>
>
> Uptime is 0 day, 11 hours, 12 minutes
>
> Console> (enable)
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- Kanwal Chawla 408-881-3209Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART