From: Nick Matthews (matthn@gmail.com)
Date: Tue Aug 26 2008 - 21:16:36 ART
http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/admin/configuration/guide/cmeadm.html
On Tue, Aug 26, 2008 at 7:03 PM, Radioactive Frog <pbhatkoti@gmail.com>wrote:
> Hi Mark,
> You need to have a CME feature IOS for start.
> load that IOS image into the router.
>
> go to config t
> issue the command 'telephony-service setup'
>
> it will take 3-5 minutes to configure everything u need to setup 2 phones
> to
> ring each other. later you may need to connect cme router to pstn then u
> need to configure the e1/t1 controller interface and call routing stuffs.
>
> hth
>
> -frog
> CCIE voice#21569
>
>
>
> On Wed, Aug 27, 2008 at 12:52 AM, Mark Anthony <mctony@ymail.com> wrote:
>
> > Hello GS,
> >
> > I want to configure IPT using a Cisco 2811 Router can anybody help me
> with
> > a
> > guides.
> >
> > Thanks in advance.
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART