From: Scott Morris (swm@emanon.com)
Date: Tue Aug 26 2008 - 00:57:49 ART
What does your output from "debug ppp authentication" look like?
Make sure you don't have a space after CISCO.
It should work just fine. The lab I'm working on today did the same thing,
works great.
R2 will use its hostname by default (why you need to name) and then the
password you specified.
HTH,
Scott Morris, CCIE4 #4713, JNCIE-M #153, JNCIS-ER, CISSP, et al.
CCSI/JNCI-M/JNCI-ER
Senior CCIE Instructor
smorris@internetworkexpert.com
Internetwork Expert, Inc.
http://www.InternetworkExpert.com
Toll Free: 877-224-8987
Outside US: 775-826-4344
Online Community: Communities are what life is all about.
CCIE Blog: To avoid the filter, we don't list it, but people love it.
Knowledge is power.
Power corrupts.
Study hard and be Eeeeviiiil......
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of Mark
Stephanus Chandra
Sent: Monday, August 25, 2008 11:38 PM
To: ccielab@groupstudy.com
Subject: Chap Authentication
Dear Friends,
Need Confirmation About CHAP Authentication in PPP Encapsulation.
I have a lab topology R1 -----serial----------R2
R1 have PPP encapsulation through R2
Have A Task to do :
1. Configure R1 to challenge Chap Authentication to R2
2. R2 should respond with password CISCO
3. no username command at R2
The solution provided :
R1.
username R2 password CISCO
interface serial
encapsulation PPP
clockrate 64000
ppp authentication CHAP
R2.
interface serial
encapsulation PPP
ppp chap password CISCO
I tried the solution but it cannot make my line protocol serial goes up.
My understanding about PPP Authentication CHAP so far is that we need to
authenticate the router both direction. So I Think there is no way that we
can get this authentication works without 'username command' on R2.
Cause R1 need to authenticate also to R2 right ?
But I also try this solution of mine but it doesn't work either :) Make me
frustated.
Can anyone help ?
Thanks in advance guys
Regards
Mark Stephanus Chandra
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART