From: raul raul (juvenn@hotmail.com)
Date: Mon Aug 25 2008 - 23:13:01 ART
Hi
the ip mroute is solve the RPF failure issued.
multicast route is based on source .
> Date: Tue, 26 Aug 2008 08:18:44 +0700> From: mark.chandra@gmail.com> To: ccielab@groupstudy.com> Subject: Multicast Question> > Guys,> > I have a simple question about multicast. I'm wondering why ip multicast> route static always perform on client attached router and no ip multicast> route static to come back from the source ?> > like these example of question :> > Multicast Source -------- R4 -----------R3--------------R1-------Multicast> Client> > Connection between R4 - R3 - R1 happen to be frame-relay, so it is a hub> and spoke topology with R3 as the hub.> > The solution is create tunnel between R4 and R1 using ip mroute to multcast> source on R1 with Tunnel interface as the gateway and there is no ip> multicast static route to go back to multicast client.> > The Question is How R4 going back to R1 ? Using unicast routing table ?> > If Yes then it's not going back using the interface tunnel right ? so it is> not a symectric routing solution.> > Hope you guys know wha!
t I meant> > Thanks a lot> > > -- > Mark Stephanus Chandra> > > Blogs and organic groups at http://www.ccie.net> > _______________________________________________________________________> Subscription information may be found at: > http://www.groupstudy.com/list/CCIELab.html> > > > > > >
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART