From: Joseph Brunner (joe@affirmedsystems.com)
Date: Sat Aug 23 2008 - 03:13:36 ART
Embedded event monitor monitors ios conditions using little applets running
on the router.
They can be configured to watch certain conditions or take actions if
necessary. I used one in production to remote a bgp network command if a
static route's tracked object failed, etc.
Search the archives my example is there.
Also check out Ivan Pepelnjak's eem section on ios blogspot... more than
useful!
-Joe
http://blog.ioshints.info/search/label/EEM
-----Original Message-----
From: nobody@groupstudy.com [mailto:nobody@groupstudy.com] On Behalf Of
Jason Madsen
Sent: Friday, August 22, 2008 5:52 PM
To: Nick Matthews
Cc: <ccielab@groupstudy.com>
Subject: Re: T1 Path Selection
so maybe use a TCL script to run "show" cmds and view T1 errors and then
possibly use object tracking to manipulate path costs etc? what's EEM?
On Fri, Aug 22, 2008 at 3:47 PM, Nick Matthews <matthn@gmail.com> wrote:
> This would probably have to be done with EEM or TCL scripts using the OID
> within certain traps. You may have some luck finding it out there though.
>
> On Fri, Aug 22, 2008 at 5:43 PM, Jason Madsen
<madsen.jason@gmail.com>wrote:
>
>> have a question...if we have 2 T1 links terminating into one router, is
>> there a threshold to set somewhere that would specify to use on over
>> another
>> if one of the T1s receives a specified number of errors (e.g. CRC, OOF,
>> SES,
>> BIP etc.)? seems as though the router would try and use both links
>> unless
>> one of the T1s was degraded enough that it showed "down".
>>
>> any ideas / experiences?
>>
>> thanks,
>> Jason
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:32 ART