From: Hyunseog Ryu (r.hyunseog@ieee.org)
Date: Fri Aug 22 2008 - 14:09:30 ART
Hi Guys,
I would like to form BGP session between remote locations.
RTR A (GigE MTU 9000 bytes) ---- (GigE MTU 9000 bytes) RTR B (GigE MTU
1500 )--- (GigE MTU 1500 ) RTR C (GigE MTU 9000) --- (GigE MTU 9000) RTR D
With this connection, I would like to form EBGP multihop session between
RTR A and RTR D.
But when I setup, it would not come up because it uses MTU 9000 bytes
for BGP update packet, but the circuit between RTR B and RTR C has 1500
MTU limitation.
I don't have control over those two routers.
Is there any way for BGP to use lower MTU for specific session only ?
I appreciate your help.
Thanks.
Hyun
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART