From: KS Anpu (ksanpu@gmail.com)
Date: Fri Aug 22 2008 - 11:49:07 ART
Yes , may be but the thing is the ios is nearly 90 MB so it will take a big
time if i start through xmodem. Actually IOS is there , if i put dir
bootdisk: , i can see the ios , but if i try to boot using this only it is
giving the magic number error.
is there any document available it documentation center for customize the
boot variables from Rommon.? if so Can anyone help me to find that.
Regards,
Anbu
On Fri, Aug 22, 2008 at 6:26 PM, Dan C <cdan2154@gmail.com> wrote:
> Hi Anbu,
>
> If you get across bad file magic number it meas that the ios file is
> corrupted and you will need to xmodem a fresh image from rommon....
>
> Cheers,
> Dan
>
> On Fri, Aug 22, 2008 at 5:21 PM, KS Anpu <ksanpu@gmail.com> wrote:
>
>> Hi anyone can help me to edit the magic number from Rommon in VS-S720-10G.
>> The issue is when the switch is booting it is going to Rommon and cannot
>> boot from there. i am getting the error message as
>> rommon 1 > boot
>>
>> Initializing ATA monitor library...
>> string is bootdisk:s72033-ipbasek9-vz.122-33.SXH2a.bin
>> Loading image, please wait ...
>>
>>
>> Initializing ATA monitor library...
>> loadprog: bad file magic number: 0x0
>> boot: cannot load "bootdisk:"
>>
>> But the ios is in bootdisk: , So is there any way to change the magic
>> number
>> or get the default configuration.
>>
>> Regards,
>> Anbu
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART