From: Igor Manassypov (imanassypov@rogers.com)
Date: Mon Aug 18 2008 - 09:15:54 ART
Configuration looks off,
First of all - which is 'e' and which is an 's' ?
Also you are missing 'extendable' at the end of each translations since this is an 'ambiguous' connection whith 2-1 port translation according to cisco doc.
Fahad Khan <fahad.khan@gmail.com> wrote: Hi Usama,
-Configure Vty lines on R2 and also enable http services on it by "ip http
server" command.
-Connect new router R3 with R1 and then telnet Inside global IP
10.10.1.254from R3, first simply and then on the port 80.Must be
successful.
-"Show ip nat translations" on R1 should provide you desired mappings.
HTH
On 8/18/08, Usama Pervaiz wrote:
>
> Hello everyone!
>
> I am trying a NAT translation scenario.
>
> Configure on router R1
>
> telnet connections to 10.10.1.254 will translate to loopback of R2 (
> 10.10.2.2)
> http connections to 10.10.1.254 will translate to s0 (10.10.12.2) of R2
>
> R1 ==== R2
>
> R1 is connected to R2 via S0 and R1 is connected to the rest of the
> network with e0
>
> I was trying this with a static nat on R1 and this is what I did:
>
> R1
>
> int e0
> ip nat outside
>
> int s0
> ip nat inside
>
> ip nat inside source static tcp 10.10.2.2 23 10.10.1.254 23
> ip nat inside source static tcp 10.10.12.2 80 10.10.1.254 80
>
>
> is this the correct config or am I way off??
>
> Also how would i verify this solution on my lab.
>
> Thanks in advance.
>
> Usama
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
-- *FAHAD KHANBE Computer Systems NED,
CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE (Written)
Systems Support Engineer, Premier Systems (Pvt) limited,
Karachi, Pakistan
92-321-2370510.*
Blogs and organic groups at http://www.ccie.net
This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART