RE: EIGRP issue

From: Marino Grego (Marino.Grego@snt.si)
Date: Sun Aug 17 2008 - 13:40:14 ART

I have had the same problem in my case. The problem was that R1 and R2 have
the same EIGRP router-id.
So check EIGRP router-id on all R1,R2 and R3.

Regards, Marino

________________________________

From: nobody@groupstudy.com on behalf of Fahad Khan
Sent: ned 17.8.2008 14:50
To: akyccie
Cc: ccielab@groupstudy.com
Subject: Re: EIGRP issue

Normally it doesnt happen, plz paste "sh run" of all the three routers.

On 8/17/08, akyccie <akyccie@gmail.com> wrote:
>
> There are 3 routers (R1, R2 and R3) connected over ethernet and runing
> EIGRP.
> Everything looks fine, eigrp neigbourship established on all the router and
> learning loopback of all the three routers in EIGRP.
>
> R2
> |
> |
> R1---------------R3
>
> R3 is also running OSPF and when I redistribute OSPF to EGIRP on R3. I can
> see
> all the OSPF routers as EIGRP External ( D EX)router on R2 router but not
> on
> R1.
>
> I tried vice versa also. conffigure OSFP on R1 and redistributed into EIGRP
> but result is same. I can see the routes on R2 but on R3.
>
> So what's worng here ?????
>
> -aky
>
>
> Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

--
*FAHAD KHAN

BE Computer Systems NED,

CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE  (Written)

Systems Support Engineer, Premier Systems (Pvt) limited,

Karachi, Pakistan

92-321-2370510.*

Blogs and organic groups at http://www.ccie.net <http://www.ccie.net/>

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:31 ART