Re: redistribute connected under eigrp

From: Fahad Khan (fahad.khan@gmail.com)
Date: Fri Aug 15 2008 - 17:25:06 ART

Kindly send the outputs of "sh run inter fa0/1" and "sh inter fa0/1"

regards,

On 8/15/08, bobby bobby <ccie_boy@yahoo.com> wrote:
>
>
> Dear experts,
>
> I was matching a connected interface under eigrp. When i used a
> route map that matched the interface type it did not redistribute .
> It only works when i matched ip address of the connected interface
> under a
> route map
>
> Please is this an eigrp behaviour.
>
> My config is below
>
> router eigrp 5
> redistribute connected metric 1000 1500 1 255 1500 route-map BB2
> redistribute ospf 1 metric 1000 100 255 1 1500
> network 170.16.17.5 0.0.0.0
> no auto-summary
> eigrp router-id 150.1.5.5
>
>
> method 1
> !
> route-map BB2 permit 10
> match interface FastEthernet0/1 this was not working
>
>
> method 2 this works
> !
> access-list 10 permit 183.1.5.0 0.0.0.255
> !
> route-map BB2 permit 10
> match ip address 10
> !
> !
> !
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
> 

-- 
*FAHAD KHAN

BE Computer Systems NED,

CCNA,CCDA,CCNP,FOUNDFE,CLSE,QOS,JNCIA,JNCIS,MCP,CCIE  (Written)

Systems Support Engineer, Premier Systems (Pvt) limited,

Karachi, Pakistan

92-321-2370510.*

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:30 ART