RE: Manipulating External EIGRP Distance

From: Mark Stephanus Chandra (mark.chandra@gmail.com)
Date: Wed Aug 13 2008 - 13:10:11 ART

Hi David,

 

Thanks A lot

 

Regards

 

Mark Stephanus Chandra
IT Consultant

 

 

From: David Lonnie [mailto:david.lonnie@gmail.com]
Sent: Wednesday, August 13, 2008 9:52 PM
To: Mark Stephanus Chandra
Cc: ccielab@groupstudy.com
Subject: Re: Manipulating External EIGRP Distance

 

Hi,
I have tested. The answer is no

R1#sh run | be router eigrp
router eigrp 1
 redistribute connected metric 1 1 1 1 1
 network 1.1.123.1 0.0.0.0
 no auto-summary
!

R2#sh run | be router eigrp
router eigrp 1
 network 1.1.2.2 0.0.0.0
 network 1.1.123.2 0.0.0.0
 distance 91 1.1.123.1 0.0.0.0 1
 no auto-summary
!

R2#sh ip route
Codes: C - connected, S - static, R - RIP, M - mobile, B - BGP
       D - EIGRP, EX - EIGRP external, O - OSPF, IA - OSPF inter area
       N1 - OSPF NSSA external type 1, N2 - OSPF NSSA external type 2
       E1 - OSPF external type 1, E2 - OSPF external type 2
       i - IS-IS, su - IS-IS summary, L1 - IS-IS level-1, L2 - IS-IS level-2
       ia - IS-IS inter area, * - candidate default, U - per-user static
route
       o - ODR, P - periodic downloaded static route

Gateway of last resort is not set

     1.0.0.0/24 is subnetted, 3 subnets
D EX 1.1.1.0 [170/2560512256] via 1.1.123.1, 00:02:10, Serial1/0
C 1.1.2.0 is directly connected, Loopback0
C 1.1.123.0 is directly connected, Serial1/0
R2#

as you can see that, this command can not impact AD of external eigrp
routes.

David

On Tue, Aug 12, 2008 at 10:49 PM, Mark Stephanus Chandra
<mark.chandra@gmail.com> wrote:

Dear Expert,

Can we manipulate external eigrp distance with command :

distance {AD} {source-add} {subnet-mask} {acl}

Thanks in advance 

--
Mark Stephanus Chandra
IT Consultant

Blogs and organic groups at http://www.ccie.net

This archive was generated by hypermail 2.1.4 : Mon Sep 01 2008 - 08:15:30 ART